Enviar artigo por via de e-mail Predicting the State of Engineering Objects Based on Current Monitoring of Their Parameters
- Autores: Sysoev Y.S.1, Sal’nikov A.A.2, Beketov V.G.1, Chernov A.V.1
-
Afiliações:
- Volgodonsk Engineering and Technical Institute, Branch of the National Research Nuclear University MEPhI (Moscow Engineering Physics Institute)
- Rostov Nuclear Power Plant
- Edição: Volume 59, Nº 4 (2016)
- Páginas: 345-350
- Seção: General Problems of Metrology and Measurement Technique
- URL: https://journals.rcsi.science/0543-1972/article/view/245843
- DOI: https://doi.org/10.1007/s11018-016-0969-2
- ID: 245843
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
A method is proposed for stochastic estimation of the time the parameters of monitored engineering objects will be within a specified range of tolerances based on the theory of mass servicing. An example is given of the application of this method to monitoring the parameters of equipment at nuclear power plants.
Sobre autores
Yu. Sysoev
Volgodonsk Engineering and Technical Institute, Branch of the National Research Nuclear University MEPhI (Moscow Engineering Physics Institute)
Autor responsável pela correspondência
Email: sysoev2004@mail.ru
Rússia, Volgodonsk
A. Sal’nikov
Rostov Nuclear Power Plant
Email: sysoev2004@mail.ru
Rússia, Volgodonsk
V. Beketov
Volgodonsk Engineering and Technical Institute, Branch of the National Research Nuclear University MEPhI (Moscow Engineering Physics Institute)
Email: sysoev2004@mail.ru
Rússia, Volgodonsk
A. Chernov
Volgodonsk Engineering and Technical Institute, Branch of the National Research Nuclear University MEPhI (Moscow Engineering Physics Institute)
Email: sysoev2004@mail.ru
Rússia, Volgodonsk
Arquivos suplementares
