电邮这篇文章 An Efficient and Practical Process for the Synthesis of Benzimidazole and Benzothiazole Derivatives Catalyzed by Layered Zirconium Phosphate: Effect of Calcinations Temperature
- 作者: Sadraoui K.1, El Haj T.1, El Mejdoubi K.1, Benzekri Z.2,3, El Hezzat M.1, Boukhris S.2, Sallek B.1,4
-
隶属关系:
- Laboratory of Advanced Materials and Process Engineering. Faculty of Science, University Ibn Tofaïl
- Laboratory of Organic Chemistry, Catalysis and Environment, Department of Chemistry, Faculty of Sciences, Ibn Tofail University
- Laboratory of Heterocyclic Organic Chemistry, Faculty of Sciences, University Mohammed V
- National School of Chemistry, Ibn Tofail University
- 期: 卷 64, 编号 5 (2023)
- 页面: 607-608
- 栏目: ARTICLES
- URL: https://journals.rcsi.science/0453-8811/article/view/140949
- DOI: https://doi.org/10.31857/S0453881123050106
- EDN: https://elibrary.ru/TQJBZQ
- ID: 140949
如何引用文章
开放存取
##reader.subscriptionAccessGranted##
订阅存取
详细
Abstract—
In this work, layered zirconium phosphates were synthesized via a reflux method and calcined at different temperatures (200, 400, and 600°C). The catalytic activity of the prepared solids was tested in the condensation of o-phenylenediamine and o-aminothiophenol with various aromatic aldehydes. The reaction conditions were optimized taking into account some parameters that control the reaction, namely the nature and volume of the solvent and the mass of the catalyst. The results showed that solid ZrP-200 (layered -zirconium phosphate calcined at 200°C) is the best performing catalyst for this reaction, because it has good catalytic activity and can be reused for at least five cycles with only a slight decrease in catalytic activity. In addition, a possible mechanism for the synthesis of benzimidazoles and benzothiazoles over ZrP-200 was proposed and discussed at the end of this study.
作者简介
Khadija Sadraoui
Laboratory of Advanced Materials and Process Engineering. Faculty of Science, University Ibn Tofaïl
编辑信件的主要联系方式.
Email: khadija.sadraoui@uit.ac.ma
Morocco, Kenitra
Touayba El Haj
Laboratory of Advanced Materials and Process Engineering. Faculty of Science, University Ibn Tofaïl
编辑信件的主要联系方式.
Email: Touayba.ahlelhaj@gmail.com
Morocco, Kenitra
Khalid El Mejdoubi
Laboratory of Advanced Materials and Process Engineering. Faculty of Science, University Ibn Tofaïl
Email: sallek.brahim@uit.ac.ma
Morocco, Kenitra
Zakaria Benzekri
Laboratory of Organic Chemistry, Catalysis and Environment, Department of Chemistry,Faculty of Sciences, Ibn Tofail University; Laboratory of Heterocyclic Organic Chemistry, Faculty of Sciences, University Mohammed V
Email: sallek.brahim@uit.ac.ma
Morocco, Kenitra, P.O Box 133; Morocco, Rabat
Mounir El Hezzat
Laboratory of Advanced Materials and Process Engineering. Faculty of Science, University Ibn Tofaïl
Email: sallek.brahim@uit.ac.ma
Morocco, Kenitra
Said Boukhris
Laboratory of Organic Chemistry, Catalysis and Environment, Department of Chemistry,Faculty of Sciences, Ibn Tofail University
Email: sallek.brahim@uit.ac.ma
Morocco, Kenitra, P.O Box 133
Brahim Sallek
Laboratory of Advanced Materials and Process Engineering. Faculty of Science, University Ibn Tofaïl; National School of Chemistry, Ibn Tofail University
编辑信件的主要联系方式.
Email: sallek.brahim@uit.ac.ma
Morocco, Kenitra; Morocco, Kenitra
