An assessment of the potential of polymer flooding at an oil field in Western Siberia
- Authors: Zolnikov D.N.1,2
-
Affiliations:
- Tyumen Petroleum Research Center LLC
- Industrial University of Tyumen
- Issue: No 3 (2024)
- Pages: 73-82
- Section: DRILLING OF WELLS AND FIELDS DEVELOPMENT
- URL: https://journals.rcsi.science/0445-0108/article/view/357219
- DOI: https://doi.org/10.31660/0445-0108-2024-3-73-82
- ID: 357219
Cite item
Full Text
Abstract
The operational object under study has a high current water-cut and is at the final stage of development. The aim of the study is to assess the potential for polymer flooding at the object X of the deposit C through hydrodynamic calculations. Hydrodynamic modeling is performed on a synthetic model cut from a sector model of the reservoir. This model meets the criteria for selecting sites, corresponds to the parameters of a full-scale model. However, it is more detailed, which is why it was chosen to substantiate the effectiveness of polymer flooding. The model specifies the actual well location, which is in the most characteristic zone of the reservoir with the actual development system. The results of the hydrodynamic calculations demonstrated the technological efficiency of polymer flooding at the object X. The increase in the oil recovery factor was 1.85 %. Further plans include further laboratory studies of polymer solution properties, an economic assessment to select the optimal concentration and volume of polymer solution injection, and a decision on conducting pilot work.
About the authors
D. N. Zolnikov
Tyumen Petroleum Research Center LLC; Industrial University of Tyumen
Email: DN_Zolnikov2@tnnc.rosneft.ru
References
Sheng, J. J. Status of polymer-flooding technology / J. J. Sheng, B. Leonhardt, N. Azri. – doi: 10.2118/174541-PA. – Direct text // Journal of Canadian petroleum technology. – 2015. – Vol. 54, Issue 02. – P. 116–126. Jewett, R. L. Polymer Flooding — A Current Appraisal / R. L. Jewett, G. F. Schurz. – doi: 10.2118/2545-PA. – Direct text // J Pet Technol. – 1970. – Vol. 22, Issue 06. – Р. 675–684. Оценка технологической эффективности полимерного заводнения на примере пласта Ю2 Усть-Тегусской площади месторождения им. Малыка / А. В. Кобяшев, А. А. Пятков, В. А. Захаренко. – doi: 10.31660/0445-0108-2023-2-41-61. – Текст : непосредственный // Известия высших учебных заведений. Нефть и газ. – 2023. – № 2. – С. 41–61. Ильясов, И. Р. Обоснование типа и параметров активной примеси для эффективного вытеснения нефти при полимерном заводнении / И. Р. Ильясов. – doi: 10.33285/0207-2351-2021-10(634)-23-29. – Текст : непосредственный // Нефтепромысловое дело. – 2021. – № 10 (634). – С. 23–29. Reduction of Residual Oil Saturation in Sandstone Cores Using Viscoelastic Polymer / P. Qi, D. H. Ehrenfriend, H. Koh, M. T. Balhoff. – doi: 10.2118/179689-MS. – Direct text // SPE Journal. – 2017. – Vol. 22, Issue 02. – P. 447–458. Koh, H. Experimental investigation of the effect of polymers on residual oil saturation / H. Koh, V. B. Lee, G. A. Pope. – doi: 10.2118/179683-PA. – Direct text // SPE Journal. – 2018. – Vol. 23, Issue 01. – Р. 1–17. Vermolen, E. C. A Systematic Study of the Polymer Visco-Elastic Effect on Residual Oil Saturation by Core Flooding / E. C. Vermolen, M. J. Haasterecht, S. K. Masalmeh. – Text : electronic // SPE EOR Conference at Oil and Gas West Asia, Muscat, Oman, March 2014. – doi: 10.2118/169681-ms. Simulation for High Viscoelasticity Polymer Flooding Pilot in LMDN4-4 Block of Daqing oilfield / G. Chen, C. Wei, X. Han. – Text : electronic // SPE Asia Pacific Enhanced Oil Recovery Conference, Kuala Lumpur, Malaysia, 11–13 August, 2015. – doi: 10.2118/174612-ms. Дополнение к технологическому проекту разработки Самотлорского нефтегазоконденсатного месторождения. ООО «ТННЦ». – Тюмень, 2023. – Текст : непосредственный. Обзор мировых проектов полимерных методов увеличения нефтеотдачи / Р. Р. Ибатуллин, Ш. К. Гаффаров, М. Р. Хисаметдинов, Л. И. Минихаиров. – doi: 10.24887/0028-2448-2022-7-32-37. – Текст : непосредственный // Нефтяное хозяйство. – 2022. – № 7. – С. 32–37.
Supplementary files
