Magnetic-controlled composite elastomer based on polydimethylsiloxane with a porous structure

A. A. Amirov; Амиров А. А.; A. S. Kaminsky; Каминский А. С.; E. A. Arkhipova; Архипова Е. А.; N. A. Cherkasova; Черкасова Н. А.; A. O. Tovpinets; Товпинец А. О.; V. N. Leucine; Лейцин В. Н.; A. P. Pyatakov; Пятаков А. П.; V. E. Zhivulin; Живулин В. Е.; V. V. Rodionova; Родионова В. В.

doi:10.31857/S0367676523701417

Magnetic-controlled composite elastomer based on polydimethylsiloxane with a porous structure

Authors: Amirov A.A.¹, Kaminsky A.S.², Arkhipova E.A.³^,4, Cherkasova N.A.⁵, Tovpinets A.O.¹, Leucine V.N.¹, Pyatakov A.P.², Zhivulin V.E.⁵, Rodionova V.V.¹
Affiliations:
1. Baltic Federal University
2. Lomonosov Moscow State University, Faculty of Physics
3. Peter the Great St. Petersburg Polytechnic University
4. Ioffe Physical-Technical Institute of the Russian Academy of Sciences
5. South Ural State University (National Research University)
Issue: Vol 87, No 6 (2023)
Pages: 813-818
Section: Articles
URL: https://journals.rcsi.science/0367-6765/article/view/135402
DOI: https://doi.org/10.31857/S0367676523701417
EDN: https://elibrary.ru/VLEOUW
ID: 135402

Cite item

Full Text

Open Access
Restricted Access

Access granted
Restricted Access

Subscription Access

Abstract
About the authors
References
Supplementary files
Statistics

Abstract

Magnetic elastomers based on polydimethylsiloxane polymer with a filler of barium hexaferrite microparticles with a homogeneous and porous microstructure have been obtained. The microstructure, magnetic and mechanical properties of the obtained samples were studied. The filler leaching method used in the work makes it possible to obtain magnetic elastomers with a porosity of about 58%. It is shown that the porous microstructure leads to a significant decrease in the Young’s modulus of the samples from 0.63 MPa (homogeneous) to 27 kPa (porous) and doesn’t produce any significant changes in the magnetic properties of the sample.

References

Eduok U., Faye O., Szpunar J. // Progr. Org. Coat. 2017. V. 111. P. 124.
Kolesnikova V.G., Makarova L.A., Omelyanchik A.S. et al. // J. Magn. Magn. Mater. 2022. V. 558. Art. No. 169506.
Степанов Г.В., Крамаренко Е.Ю., Перов Н.С. и др. // Вест. Перм. нац. иссл. политех. ун-та. Механика. 2013. № 4. С. 106.
Li J., Liu X., Crook J.M. et al. // Colloids Surf. B. 2017. V. 159. P. 386.
Dunn K.W., Hall P.N., Khoo C.T.K. // Br. J. Plast. Surg. 1992. V. 45. No. 4. P. 315.
Chen J.S., Liu T.Y., Tsou H.M. et al. // J. Polymer Res. 2017. V. 24. No. 5. P. 1.
Kim Y., Parada G.A., Liu S., Zhao X. // Sci. Robot. 2019. V. 4. No. 33. Art. No. eaax7329.
Xu T., Zhang J., Salehizadeh M. et al. // Sci. Robot. 2019. V. 4. No. 29. Art. No. eaav4494.
Zhao X., Li L., Li B. et al. // J. Mater. Chem. A. 2014. V. 2. No. 43. P. 18281.
Choi S.J., Kwon T.H., Im H. et al. // ACS Appl. Mater. Interfaces. 2011. V. 3. No. 12. P. 4552.
Li J., Liu X., Crook J.M. et al. // Colloids Surf. B. 2017. V. 159. P. 386.
Cha K.J., Kim D.S. // Biomed. Microdevices. 2011. V. 13. No. 5. P. 877.
Duan S., Yang K., Wang Z. et al. // ACS Appl. Mater. Interfaces. 2016. V. 8. No. 3. P. 2187.
Iglio R., Mariani S., Robbiano V. et al. // ACS Appl. Mater. Interfaces. 2018. V. 10. No. 16. P. 13877.
Pullar R.C. // Progr. Mater. Sci. 2012. V. 57. No. 7. P. 1191.
Vinnik D.A., Zherebtsov D.A., Mashkovtseva L.S. et al. // Cryst. Growth Des. 2014. V. 14. No. 11. P. 5834.
Ribeiro C., Costa C.M., Correia D.M. et al. // Nature Protocols. 2018. V. 13. No. 4. P. 681.
González-Rivera J., Iglio R., Barillaro G. et al. // Polymers. 2018. V. 10. No. 6. P. 616.