Email this article Production of Carbon Materials with Specified Porosity
- Authors: Peshnev B.V.1, Filimonov A.S.1, Gavrilova N.N.2, Nikolaev A.I.1, Nguen V.K.1
-
Affiliations:
- Moscow State University of Fine Chemical Technologies
- Mendeleev University of Chemical Technology
- Issue: Vol 52, No 3 (2018)
- Pages: 173-178
- Section: Article
- URL: https://journals.rcsi.science/0361-5219/article/view/176624
- DOI: https://doi.org/10.3103/S0361521918030096
- ID: 176624
Cite item
Open Access
Access granted
Subscription Access
Abstract
The results of studies on the oxidation of carbon black are represented. It was found that materials with different porosity can be obtained by varying the nature of an activating agent and the conditions of activation. A correlation of the sizes of carbon crystallites in the initial sample, the extent of their boundaries, and the rates of pyrocompaction and oxidation of these samples with the specific surface area of materials obtained upon activation was established.
Keywords
About the authors
B. V. Peshnev
Moscow State University of Fine Chemical Technologies
Author for correspondence.
Email: peshnev@mitht.ru
Russian Federation, Moscow
A. S. Filimonov
Moscow State University of Fine Chemical Technologies
Email: peshnev@mitht.ru
Russian Federation, Moscow
N. N. Gavrilova
Mendeleev University of Chemical Technology
Email: peshnev@mitht.ru
Russian Federation, Moscow, 125047
A. I. Nikolaev
Moscow State University of Fine Chemical Technologies
Email: peshnev@mitht.ru
Russian Federation, Moscow
V. Kh. Nguen
Moscow State University of Fine Chemical Technologies
Email: peshnev@mitht.ru
Russian Federation, Moscow
Supplementary files
