A Safety Device Based on a High Temperature Shape Memory Alloy
- Authors: Popov N.N.1, Presnyakov D.V.1, Kostyleva A.A.1
-
Affiliations:
- Russian Federal Nuclear Center, All-Russia Research Institute of Experimental Physics
- Issue: No 6 (2023)
- Pages: 62-69
- Section: НОВЫЕ ТЕХНОЛОГИИ В МАШИНОСТРОЕНИИ
- URL: https://journals.rcsi.science/0235-7119/article/view/162328
- DOI: https://doi.org/10.31857/S0235711923060147
- EDN: https://elibrary.ru/EGDNOB
- ID: 162328
Cite item
Abstract
A device has been developed based on alloys with a high-temperature shape memory effect. It aims to be used in mechanical engineering products, in particular, nuclear technology, in order to prevent emergency situations of man-made and natural nature. The device works by breaking the electrical circuit in the event of an emergency increase in the ambient temperature above the permissible temperature by cutting the electrical cable. The shape restoration properties of thermosensitive working elements made of the Ni49.5Ti48.0Hf2.5 alloy with high temperature shape memory have been studied. The results of the experiments allow us to conclude that it is possible to use the device in electrical systems for cutting heat-resistant electrical cables with an outer diameter of dout = 3.4–5.0 mm and a copper wire cross-section of 0.2–1.5 mm2 with a knife in an emergency situation, when the ambient temperature exceeds 100°С and the maximum heating reaches 200°С.
Keywords
About the authors
N. N. Popov
Russian Federal Nuclear Center, All-Russia Research Institute of Experimental Physics
Email: NNPopov@vniief.ru
Sarov, Nizhny Novgorod oblast, Russia
D. V. Presnyakov
Russian Federal Nuclear Center, All-Russia Research Institute of Experimental Physics
Email: NNPopov@vniief.ru
Sarov, Nizhny Novgorod oblast, Russia
A. A. Kostyleva
Russian Federal Nuclear Center, All-Russia Research Institute of Experimental Physics
Author for correspondence.
Email: NNPopov@vniief.ru
Sarov, Nizhny Novgorod oblast, Russia
References
- Lin Pi.-Chu. US Patent 6408951 B1, 2002.
- Toho Koki K.K. JP Patent 3414997 B2, 2003.
- Kikai Kogyo K.K. JP Patent 3529514 B2, 2004.
- Nordlin William F. US Patent 6735870 B2, 2004.
- Nordlin William F. US Patent 6766581 B2, 2004.
- Urban B.R., White I.D.M., Dickens J.E., Forsberg K., Sawyer C. US Patent 6813981 B2, 2004.
- Clifton M.B., Pawlenko I., Samson L. US Patent 6779273 B1, 2004.
- Wilhelm E., Holland-Moritz G., Bernd T. US Patent 6892460 B2, 2005.
- Yasuhiko T., Tetsuro J. JP Patent 3825239 B2, 2006.
- Berg S. WO Patent 2005023475 A1, 2005.
- Газизов Б.Г., Горбенко Д.В., Афанасьев В.А. РФ Патент 2287411, 2006 г.
- Попов Н.Н., Пресняков Д.В., Ларькин.В.Ф. Устройство безопасности на основе сплавов с памятью формы // Проблемы машиностроения и надежности машин. 2020. № 3. С. 65.
- Попов Н.Н., Пресняков Д.В. РФ Патент 2784182, 2022.
- Попов Н.Н., Пресняков Д.В., Гришин Е.Н., Сысоева Т.И., Морозова Т.А., Глухарева С.В., Костылева А.А. Механические и термомеханические характеристики сплава Ni50Ti47.5Hf2.5 с высокотемпературным эффектом памяти формы // Материаловедение. 2023. № 4. С. 17.
Supplementary files
