Estimation of the time resistance of steel by the parameters of the harmonic spectrum of the remagnetization curve
- 作者: Sokolov R.1, Muratov K.1
-
隶属关系:
- Federal State Budget Educational Institution of High-er Education « Industrial University of Tyumen»/ IUT
- 期: 编号 5 (2024)
- 页面: 71-75
- 栏目: Thermal methods
- URL: https://journals.rcsi.science/0130-3082/article/view/257603
- DOI: https://doi.org/10.31857/S0130308224040068
- ID: 257603
如何引用文章
详细
The paper presents the results of laboratory studies of structural steels. The possibility of application of complex parameters obtained on the basis of harmonic components of magnetic hysteresis loop for practical estimation of steel time resistance is shown. Determination of the value of the complex parameter is carried out by means of the method of separation of diagnoses in the feature space and the method of group accounting of arguments. Registration of magnetic hysteresis loops is carried out by means of magnetic structuroscope DIUS-1.15M. The weight coefficients of the influence of harmonic components on the value of the complex parameter were determined. The results of the study demonstrate the possibility of satisfactory estimation of the strength of steel by the value of the complex parameter.
全文:
作者简介
R. Sokolov
Federal State Budget Educational Institution of High-er Education « Industrial University of Tyumen»/ IUT
编辑信件的主要联系方式.
Email: falcon.rs@mail.ru
俄罗斯联邦, 625000 Tyumen, Volodarsky str., 38
K. Muratov
Federal State Budget Educational Institution of High-er Education « Industrial University of Tyumen»/ IUT
Email: muratovkr@tyuiu.ru
俄罗斯联邦, 625000 Tyumen, Volodarsky str., 38
参考
- Agamirov L.V. Mashinostroenie / Enciklopediya. 40 t. Razd. 2. Materialy v mashinostroenii. T. 2-1. Fiziko-mekhanicheskie svojstva. Ispytaniya metallicheskih materialov (Mechanical Engineering. Encyclopedia. In 40 vol. Section 2. Materials in mechanical engineering. Т. 2-1. Physical and mechanical properties. Tests of metallic materials), Moscow: Mashinostroenie, 2010, Р. 851.
- GOST 1497—84. Metally. Metody ispytanij na rastyazhenie (Metals. Tensile test methods): Introduced 1986-01-01. Moscow: Izd-wo standards, 1990. Р. 52.
- Poletika I.M., Egorova N.M., Kulikova O.A., Zuev L.B. About ultrasonic control of heterogeneity of mechanical properties of hot-rolled steel // Journal of Technical Physics. 2001. Т. 71. No. 3. P. 37—40.
- Ponomarev Yu.F. Laws of harmonic components of magnetization of cyclically remagnetized ferromagnetic cores and possibilities of their use. I. Criteria of physical similarity // Defectoscopya. 1983. No. 9. P. 52—62.
- Novikov V.F., Neradovsky D.F., Sokolov R.A. Use of quasi-static magnetic hysteresis loops for steel structure control // Bulletin of Perm National Research Polytechnic University. 2016. Т. 18. No. 2. P. 38—49.
- Sokolov R.A., Muratov K.R., Novikov V.F. Application of the spectral characteristics parameters of the remagnetization curve to determine the hardness of a ferromagnetic material // Defectoscopya. 2023. No. 6. P. 70—72.
- Markovets M. P. Determination of Mechanical Properties of Metals by Hardness. M.: Mashinostroenie, 1979. Р. 171.
- Sandomirsky S.G. Analysis of the relationship between the coercive force and the time resistance of carbon steels // Steel. 2016. No. 9. P. 62—65.
- Sandomirsky S.G. Generalized correlation dependences between the time resistance of steels and their hardness // Zavodskaya laboratoriya. Diagnostics of materials. 2017. Т. 83. No. 11. P. 52—57.
- Sokolov R.A., Novikov V.F., Kovenskij I.M., Muratov K.R., Venediktov A.N., Chaugarova L.Z. The effect of heat treatment on the formation of MnS compound in low-carbon structural steel 09Mn2Si. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) // Metal Working and Material Science. 2022. V. 24. No. 4. P. 113—126.