Email this article On the possibility of determining the elastic modulus of metals by the dynamic instrumented indentation method
- Authors: Gogolinskii K.V1, Umanskii A.S1, Golev A.S1
-
Affiliations:
- Saint-Petersburg Mining University
- Issue: No 8 (2023)
- Pages: 65-67
- Section: Articles
- URL: https://journals.rcsi.science/0130-3082/article/view/141568
- DOI: https://doi.org/10.31857/S0130308223080080
- EDN: https://elibrary.ru/DZHGOX
- ID: 141568
Cite item
Open Access
Access granted
Subscription Access
Abstract
The study was carried out as part of the development of a non-destructive method for measuring the mechanical properties of metals and alloys based on the dynamic instrumented indentation method. The purpose of this work is to study the possibility of measuring the modulus of elasticity using a modified Leeb hardness tester. The experiment was carried out on samples of 20X25H20C2, 20X23H18, BpA9Zh4H4Mts1 alloys.
About the authors
K. V Gogolinskii
Saint-Petersburg Mining University
Email: gogolinskiy_kv@pers.spmi.ru
St. Petersburg, Russia
A. S Umanskii
Saint-Petersburg Mining University
Email: umanskiy_as@pers.spmi.ru
St. Petersburg, Russia
A. S Golev
Saint-Petersburg Mining University
Email: artemgolev1999@gmail.com
St. Petersburg, Russia
References
- Rodrigues Santiago, Miri Seyed, Cole Richard G., Postigo Abraham Avalos, Saleh Menna A., Dondish Alexander, Melenka Garrett W., Fayazbakhsh Kazem. Towards optimization of polymer filament tensile test for material extrusion additive manufacturing process // Journal of Materials Research and Technology. 2023. ISSN 2238-7854. https://doi.org/10.1016/j.jmrt.2023.05.088
- Han Giyeol, Marimuthu Karuppasamy Pandian, Lee Hyungyil. Evaluation of thin film material properties using a deep nanoindentation and ANN // Materials & Design. 2022. V. 221. P. 111000. ISSN 0264-1275. https://doi.org/10.1016/j.matdes.2022.111000
- Rudnitskii V.A., Rabtsevich A.V. Method of dynamic indentation for evaluating the mechanical characteristics of metallic materials // Russian Journal of Nondestructive Testing. 1997. V. 33. No. 4. P. 266-271.
- Umanskii A., Gogolinskii K., Syasko V., Golev A. Modification of the Leeb Impact Device for Measuring Hardness by the Dynamic Instrumented Indentation Method // Inventions. 2022. V. 7. P. 29. https://doi.org/10.3390/inventions7010029
- Leeb D. New dynamic method for hardness testing of metallic materials // VDI-Report. 1978. No. 308. P. 123-128.
