Enviar artigo por via de e-mail High-Temperature Bending Tests of Reaction-Sintered Silicon Carbide-Based Ceramic Materials
- Autores: Markov M.1, Vikhman S.2, Belyakov A.1, Dyuskina D.1, Kashtanov A.1, Perevislov S.1, Chekuryaev A.1, Bykova A.1
-
Afiliações:
- NRC “Kurchatov Institute”- CRISM “Prometey”, 191015, St. Petersburg, Russia
- St. Petersburg State Institute of Technology (Technical University), 191013, St. Petersburg, Russia
- Edição: Nº 1 (2023)
- Páginas: 21-26
- Seção: Articles
- URL: https://journals.rcsi.science/0044-4618/article/view/141696
- DOI: https://doi.org/10.31857/S0044461823010036
- EDN: https://elibrary.ru/HUFWAH
- ID: 141696
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
The high-temperature strength properties of silicon carbide-based ceramic materials reaction-sintered in air and vacuum are proved by experimental data. The ultimate bending strength of pressed and cast ceramic material samples at temperatures up to 1400°C was measured as a criterion. High-temperature tests demonstrate the guaranteed strength of ceramics above 100 MPa. An example of the manufacture of a complex shaped ceramic product using the hot slip casting processing under pressure into additive water-soluble forms is given. An approval of the combined technology makes it possible to manufacture bladed ceramic elements with a thickness of about 1 mm.
Sobre autores
M. Markov
NRC “Kurchatov Institute”- CRISM “Prometey”, 191015, St. Petersburg, Russia
Email: acjournal.nauka.nw@yandex.ru
S. Vikhman
St. Petersburg State Institute of Technology (Technical University), 191013, St. Petersburg, Russia
Email: acjournal.nauka.nw@yandex.ru
A. Belyakov
NRC “Kurchatov Institute”- CRISM “Prometey”, 191015, St. Petersburg, Russia
Email: acjournal.nauka.nw@yandex.ru
D. Dyuskina
NRC “Kurchatov Institute”- CRISM “Prometey”, 191015, St. Petersburg, Russia
Email: acjournal.nauka.nw@yandex.ru
A. Kashtanov
NRC “Kurchatov Institute”- CRISM “Prometey”, 191015, St. Petersburg, Russia
Email: acjournal.nauka.nw@yandex.ru
S. Perevislov
NRC “Kurchatov Institute”- CRISM “Prometey”, 191015, St. Petersburg, Russia
Email: acjournal.nauka.nw@yandex.ru
A. Chekuryaev
NRC “Kurchatov Institute”- CRISM “Prometey”, 191015, St. Petersburg, Russia
Email: acjournal.nauka.nw@yandex.ru
A. Bykova
NRC “Kurchatov Institute”- CRISM “Prometey”, 191015, St. Petersburg, Russia
Autor responsável pela correspondência
Email: acjournal.nauka.nw@yandex.ru
Bibliografia
- Руденко В. Н., Третьяченко Г. Н., Трощенко В. Т., Писаренко Г. С. Прочность материалов при высоких температурах / Под ред. акад. Г. С. Писаренко. АН УССР. Ин-т проблем материаловедения. Киев: Наук. думка, 1966. С. 505-541.
- Беляков А. Н., Марков М. А., Чекуряев А. Г., Быкова А. Д., Дюскина Д. А., Перевислов С. Н. Исследование реакционно-спеченных материалов B4C-SiC, полученных методом горячего шликерного литья // Физика и химия стекла. 2023. Т. 49. № 3. С. 346-356. EDN: SJSMJO
- Беляков А. Н., Марков М. А., Перевислов С. Н., Дюскина Д. А., Чекуряев А. Г., Быкова А. Д., Каштанов А. Д. Исследование структуры и физико-механических характеристик реакционно-спеченных материалов B4C-SiC // Новые огнеупоры. 2023. № 2. С. 29-33. https://doi.org/10.17073/1683-4518-2023-2-29-33
- Song S., Lu B., Gao Z., Bao C., Ma Y. Microstructural development and factors affecting the performance of a reaction-bonded silicon carbide composite // Ceram.Int. 2019. V. 45. N 14. P. 17987-17995. https://doi.org/10.1016/j.ceramint.2019.06.017
- Wang Y.-X., Tan Sh.-H., Jiang D.-L. The Fabrication of reaction-formed silicon carbide with controlled microstructure by infiltrating a pure carbon preform with molten Si // Ceram.Int. 2004. V. 30. N 3. P. 435-439. https://doi.org/10.1016/S0272-8842(03)00128-7
- Perevislov S. N., Markov M. A., Krasikov A. V., Bykova A. D. Effect of SiC dispersed composition on physical and mechanical properties of reaction-sintered silicon carbide // Refract. Ind. Ceram. 2020. V. 61. N 2. P. 211-215. https://doi.org/10.1007/s11148-020-00458-4
- Markov M. A., Krasikov A. V., Kravchenko I. N., Erofeev M. N., Bykova A. D., Belyakov A. N. Development of novel ceramic construction materials based on silicon carbide for products of complex geometry //j. Machinery Manufacture Reliability. 2021. V.50. N 2. P. 158-163. https://doi.org/10.3103/S1052618821020096
- Пат.RU 2739774 C1 (опубл. 28.12.2020). Способ получения конструкционного керамического материала на основе карбида кремния для изделий сложной геометрии.
- Hijikata Y., Yagi S., Yaguchi H., Yoshida S. Physics and technology of silicon carbide devices //IntechOpen. 2012. P. 181-191. https://doi.org/10.5772/3428
