Impact of the Composition of Rubbers Filled with Carboxymethyl Cellulose on Their Properties
- Authors: Cherezova E.N.1, Galikhanov M.F.1, Karaseva Y.S.1, Nakyp A.M.1
-
Affiliations:
- Kazan National Research Technological University
- Issue: No 4 (2023)
- Pages: 391-396
- Section: Articles
- URL: https://journals.rcsi.science/0044-4618/article/view/247298
- DOI: https://doi.org/10.31857/S0044461823040096
- EDN: https://elibrary.ru/OFYVZU
- ID: 247298
Cite item
Abstract
The impact of the amount of water-swellable filler sodium carboxymethylcellulose of Polycell-9B grade (particle size 1.0–2.0 mm) on the complex of physical and mechanical properties of limited swelling rubbers based on nitrile butadiene rubber of BNKS-28 AMN grade with a sulfur vulcanizing system was studied. The composition with a ratio of the rubber compound without swelling filler to sodium carboxymethylcellulose was varied in the range (65–35) : (35–65) (wt. parts). It was established that the introduction of a swelling filler into the rubber compound has virtually no effect on the time to achieve the optimal vulcanization time and is 10 min at a temperature of 170°C. It was shown that the introduction of sodium carboxymethylcellulose leads to a decrease in the deformation-strength properties of rubbers, however, the strength characteristics of modified rubbers allow the use of the developed rubber compositions for the manufacture of sealing elements of water-swellable packers. It was revealed that with an increase in the proportion of the swelling filler, sodium carboxymethylcellulose, the vulcanizate exhibits a higher sorption capacity in aqueous media with different pH.
About the authors
E. N. Cherezova
Kazan National Research Technological University
Email: acjournal.nauka.nw@yandex.ru
420015, Kazan, Russia
M. F. Galikhanov
Kazan National Research Technological University
Email: acjournal.nauka.nw@yandex.ru
420015, Kazan, Russia
Yu. S. Karaseva
Kazan National Research Technological University
Email: acjournal.nauka.nw@yandex.ru
420015, Kazan, Russia
A. M. Nakyp
Kazan National Research Technological University
Author for correspondence.
Email: acjournal.nauka.nw@yandex.ru
420015, Kazan, Russia
References
- Новаков И. А., Ваниев М. А., Лопатина С. С., Нилидин Д. А., Сычев Н. В., Савченко Я. Ю., Брук А. Д. Состояние и тенденции развития производства и применения водо- и нефтенабухающих эластомеров для пакерного оборудования // Каучук и резина. 2019. Т. 78. № 4. С. 228-239. https://www.elibrary.ru/rpguqb
- Galikhanov M. F., Akhmedzyanova D. M., Nikitin N. R. The development and the study of the properties of hydrosorption material based on a blended thermoplastic vulcanisate // Int. Polym. Sci. Technol. 2016. V. 44. N 2. P. 9-14. https://doi.org/10.1177/0307174x1704400802
- Бабкин В. Т., Сидельникова Е. Г. Уплотнительные материалы для герметизации гидравлических систем // Хим. пром-сть сегодня. 2011. № 5. С. 54-59. https://www.elibrary.ru/nuanrl
- Drobny J. G. Handbook of thermoplastic elastomers. Elsevier, 2014. P. 33-37.
- Пат. РФ 2510881 (опубл. 2014). Способ получения термопластичной эластомерной композиции.
- Целых Е. П., Третьякова Н. А. Влияние наполнителей различной активности на водонабухание резин на основе бутадиен-нитрильного каучука // Каучук и резина. 2022. Т. 81. № 3. С. 134-137. https://doi.org/10.47664/0022-9466-2022-81-3-134-137 https://www.elibrary.ru/domgza
- Ефимов К. В., Егоров Е. Н., Ушмарин Н. Ф., Кольцов Н. И. Влияние гидросорбционных полимеров на свойства водонабухающей резины // Бутлеровские сообщ. 2020. Т. 64. № 10. С. 90-93. https://doi.org/10.37952/ROI-jbc-01/20-64-10-90
- Хо Х. Н., Рахматуллина А. П., Ибрагимов М. А., Ле К. З., Данг В. Х. Разработка водонабухающих резин на основе натурального каучука и натрий-карбоксиметилцеллюлозы // Ползуновский вестн. 2023. № 2. С. 184-192. https://doi.org/10.25712/ASTU.2072-8921.2023.02.024
- Черезова Е. Н., Карасева Ю. С., Галиханов М. Ф. Влияние натрий-карбоксиметилцеллюлозы на свойства высоконаполненных резин на основе бутадиен-нитрильного каучука // Пром. пр-во и использ. эластомеров. 2021. Т. 3. С. 33-37. https://doi.org/10.24412/2071-8268-2021-3-33-37
- Черезова Е. Н., Карасева Ю. С., Момзякова К. С. Гидрофильная резина на основе бутадиен-нитрильного каучука и порошковой целлюлозы растительного происхождения // Все материалы. Энциклопед. справ. 2021. № 7. С. 33-37. https://doi.org/10.31044/1994-6260-2021-0-7-33-37
- Глаголева Л. Э., Коротких И. В. Исследование влияния условий процесса и свойств среды на кинетику процесса набухания хлопьев зеленой гречки // Вестн. ВГУИТ. 2015. № 1. С. 134-137. https://doi.org/10.20914/2310-1202-2015-1-134-137 https://www.elibrary.ru/ttufgz
- Носиков А. Ф., Колесник В. И. Свойства водонабухающих резин на основе наирита // Каучук и резина. 1994. № 5. С. 11-13.
- Заикин А. Е., Бобров Г. Б. Компатибилизация смесей несовместимых полимеров наполнением // Высокомолекуляр. соединения. Сер. А. 2012. Т. 54. № 8. С. 1275-1282. https://www.elibrary.ru/ozlehx
![](/img/style/loading.gif)