Email this article 
THE RESEARCH OF THE APPLICATION OF 3D PRINTING FOR THE MANUFACTURE OF A SCINTILLATION DETECTOR CASE
- Authors: Veresnikova A.V.1,2, Gavrilyuk Y.M.1, Kazalov V.V.1,2,3, Kochkarov M.M.1,2
-
Affiliations:
- Institute of Nuclear Research of the Russian Academy of Sciences
- Kabardino-Balkarian State University named after H.M. Berbekov
- National Research Nuclear University “MEPhI”
- Issue: Vol 88, No 1 (2025)
- Pages: 19–23
- Section: ЯДРА. Эксперимент
- URL: https://journals.rcsi.science/0044-0027/article/view/303723
- DOI: https://doi.org/10.31857/S0044002725010031
- EDN: https://elibrary.ru/GSSSGT
- ID: 303723
Cite item
Open Access
Access granted
Subscription Access
Abstract
The paper considers the possibility of using 3D printing technology to manufacture structural elements of ionizing radiation detectors in low-background conditions. The results of measurements carried out using a scintillation detector with a housing made of PETG plastic are presented.
About the authors
A. V. Veresnikova
Institute of Nuclear Research of the Russian Academy of Sciences; Kabardino-Balkarian State University named after H.M. BerbekovMoscow, Russia; Nalchik, Russia
Yu. M. Gavrilyuk
Institute of Nuclear Research of the Russian Academy of SciencesMoscow, Russia
V. V. Kazalov
Institute of Nuclear Research of the Russian Academy of Sciences; Kabardino-Balkarian State University named after H.M. Berbekov; National Research Nuclear University “MEPhI”
Email: vvk1982@mail.ru
Moscow, Russia; Nalchik, Russia; Moscow, Russia
M. M. Kochkarov
Institute of Nuclear Research of the Russian Academy of Sciences; Kabardino-Balkarian State University named after H.M. BerbekovMoscow, Russia; Nalchik, Russia
References
- A. S. Barabash, Universe 6, 159 (2020).
- M. Agostini, G. Benato, J. A. Detwiler, J. Men´endez, and F. Vissani, Rev. Mod. Phys. 95, 025002 (2023).
- M. Agostini, F. F. Deppisch, and G. Van Goffrier, J. High Energy Phys. 2302, 172 (2023).
- Y. Fukuda, S. Moriyama, and I. Ogawa, Nucl. Instrum. Methods A 732, 397 (2013).
- Г. Я. Новикова, В. П. Моргалюк, Е. А. Янович, ЖНХ 66, 10540 (2021).
- И. Р. Барабанов, А. В. Вересникова, А. А. Моисеева, В. П. Моргалюк, Г. Я. Новикова, Е. А. Янович, ЯФ 86, 310 (2023).
- I. R. Barabanov, L. B. Bezrukov, G. Ya.Novikova, and E. A. Yanovich, Instrum. Exp. Tech. 60, 533 (2017).
- V. Albanese et al. (The SNO+ Collab.), JINST 16, 08059 (2021).
- C. Buck, F. X. Hartmann, T. Lasserre, D. Motta, S. Schonert, and U. Schwan, J. Luminescence 106(1), 57 (2004).
- I. R. Barabanov, A. V. Veresnikova, Yu. M. Gavrylyuk, V. I. Gurentsov, A. M. Gangapshev, V. V. Kazalov, G. Ya. Novikova, Z. Kh. Kalajokov, D. A. Tekueva, M. Sh. Thazaplichev, and E. A. Yanovich, Bull. Lebedev Phys. Inst. 50, 491 (2023).
- PETG производства Bestfilament, https://bestfilament.ru/belyy-petg-plastikbestfilamentdlya-3d-printerov-1-kg-1_75-mm/
- Полиэтилентерефталат (PET) для 3D-печати, https://top3dshop.ru/blog/petg-i-abs-kratkoesravnenie.html
- Линейный алкилбензол, https://newchemistry.ru/letter.php?n_id=1352
- Ender-3S, https://cvetmir3d.ru/blog/3dobzory/obzor-3d-printera-ender3/
- Баксанская нейтринная обсерватория ИЯИ РАН, https://www.inr.ru/bno/
- CAEN DT5724, https://www.caen.it/products/dt5724/
Supplementary files
