Development of High-Powered Steam Turbines by OAO NPO Central Research and Design Institute for Boilers and Turbines


如何引用文章

全文:

开放存取 开放存取
受限制的访问 ##reader.subscriptionAccessGranted##
受限制的访问 订阅存取

详细

The article provides an overview of the developments by OAO NPO TsKTI aimed at improvement of components and assemblies of new-generation turbine plants for ultra-supercritical steam parameters to be installed at the power-generating facilities in service. The list of the assemblies under development includes cylinder shells, the cylinder’s flow paths and rotors, seals, bearings, and rotor cooling systems. The authors consider variants of the shafting–cylinder configurations for which advanced high-pressure and intermediate-pressure cylinders with reactive blading and low-pressure cylinders of conventional design and with counter-current steam flows are proposed and high-pressure rotors, which can increase the economic efficiency and reduce the overall turbine plant dimensions. Materials intended for the equipment components that operate at high temperatures and a steam cooling technique that allows the use of cheaper steel grades owing to the reduction in the metal’s working temperature are proposed. A new promising material for the bearing surfaces is described that enables the operation at higher unit pressures. The material was tested on a full-scale test bench at OAO NPO TsKTI and a turbine in operation. Ways of controlling the erosion of the blades in the moisture–steam turbine compartments by the steam heating of the hollow guide blades are considered. To ensure the dynamic stability of the shafting, shroud and diaphragm seals that prevent the development of the destabilizing circulatory forces of the steam flow were devised and trialed. Advanced instrumentation and software are proposed to monitor the condition of the blading and thermal stresses under transient conditions, to diagnose the vibration processes, and to archive the obtained data. Attention is paid to the normalization of the electromagnetic state of the plant in order to prevent the electrolytic erosion of the plant components. The instrumentation intended for monitoring the relevant electric parameters is described.

作者简介

V. Mikhailov

OAO Polzunov Scientific-Production Association for Research and Design of Power-Generating Equipment

编辑信件的主要联系方式.
Email: turbina@ckti.ru
俄罗斯联邦, St. Petersburg, 191167

L. Khomenok

OAO Polzunov Scientific-Production Association for Research and Design of Power-Generating Equipment

Email: turbina@ckti.ru
俄罗斯联邦, St. Petersburg, 191167

I. Kovalev

OAO Polzunov Scientific-Production Association for Research and Design of Power-Generating Equipment

Email: turbina@ckti.ru
俄罗斯联邦, St. Petersburg, 191167


版权所有 © Pleiades Publishing, Inc., 2018
##common.cookie##