Enviar artigo por via de e-mail An Automated Flow Traversing Measurement System in the Last Stages of Large-Capacity Steam Turbines
- Autores: Moskalenko A.V.1, Aleksandrov A.V.1, Nekrasov A.L.1, Ivanov S.A.1, Dolganov A.G.1, Kravtsova N.V.1, Gostev O.D.2, Morkinskii D.O.2, Laskin A.S.3
-
Afiliações:
- PJSC Power Machines Leningradsky Metallichesky Zavod
- LLP PromAvtomatika
- Peter the Great St. Petersburg Polytechnic University
- Edição: Volume 66, Nº 1 (2019)
- Páginas: 27-35
- Seção: Steam Turbine, Gas Turbine, Combined-Cycle Power Plants, and Their Auxiliary Equipment
- URL: https://journals.rcsi.science/0040-6015/article/view/173181
- DOI: https://doi.org/10.1134/S0040601519010051
- ID: 173181
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
The article presents the results from putting a new automated flow traversing measurement system (AFTMS) in an experimental turbine intended for testing steam paths of the low-pressure cylinders (LPC) of large-capacity steam turbines into use. Modern computerized facilities have been used in developing the system. Such an approach has been implemented for the first time in the full-scale test bench available at PJSC Power Machines in carrying out experimental investigations of an LPC double stage compartment (on a 1 : 1 scale) equipped with a new, ultimately long last stage blade (LSB) developed for a steam turbine plant for ultrasupercritical steam conditions. The investigations were aimed at confirming the effectiveness of the developed system in measuring the flow parameters in the last LPC stage. The necessity of making a shift from nonautomated and semiautomatic systems to the use of automated measurement systems is substantiated. The article describes a system that makes it possible, with automated setting of the gas dynamic probe head position on the traversing line, to determine the steam flow direction; to measure the stagnation pressure, static pressure, and stagnation temperature; and to record the measures indicators with exactly assigned time tags. The results from measurements of flow parameters upstream of the last LPC stage in a partial load mode are given. A comparison between the experimental and calculated flow parameter distribution data over the stage radius in the control section is shown.
Sobre autores
A. Moskalenko
PJSC Power Machines Leningradsky Metallichesky Zavod
Autor responsável pela correspondência
Email: moskalenko_av@power-m.ru
Rússia, St. Petersburg, 195009
A. Aleksandrov
PJSC Power Machines Leningradsky Metallichesky Zavod
Email: moskalenko_av@power-m.ru
Rússia, St. Petersburg, 195009
A. Nekrasov
PJSC Power Machines Leningradsky Metallichesky Zavod
Email: moskalenko_av@power-m.ru
Rússia, St. Petersburg, 195009
S. Ivanov
PJSC Power Machines Leningradsky Metallichesky Zavod
Email: moskalenko_av@power-m.ru
Rússia, St. Petersburg, 195009
A. Dolganov
PJSC Power Machines Leningradsky Metallichesky Zavod
Email: moskalenko_av@power-m.ru
Rússia, St. Petersburg, 195009
N. Kravtsova
PJSC Power Machines Leningradsky Metallichesky Zavod
Email: moskalenko_av@power-m.ru
Rússia, St. Petersburg, 195009
O. Gostev
LLP PromAvtomatika
Email: moskalenko_av@power-m.ru
Rússia, St. Petersburg, 194044
D. Morkinskii
LLP PromAvtomatika
Email: moskalenko_av@power-m.ru
Rússia, St. Petersburg, 194044
A. Laskin
Peter the Great St. Petersburg Polytechnic University
Email: moskalenko_av@power-m.ru
Rússia, St. Petersburg, 195251
Arquivos suplementares
