First 1 MVA and 10/0.4 kV HTSC transformer in Russia
- Authors: Volkov E.P.1, Dzhafarov E.A.1, Fleishman L.S.1, Vysotsky V.S.2, Sukonkin V.V.3
-
Affiliations:
- OJSC Krzhizhanovsky Power Engineering Institute
- OJSC Russian Scientific Research and Development Cable Institute
- LLC MELDIS
- Issue: Vol 63, No 13 (2016)
- Pages: 909-916
- Section: Article
- URL: https://journals.rcsi.science/0040-6015/article/view/172482
- DOI: https://doi.org/10.1134/S0040601516130085
- ID: 172482
Cite item
Abstract
This article describes results of the development, construction, and test of the first three-phase distribution power transformer prototype in Russia with windings made from second-generation HTSC wire and iron core from amorphous electrical steel. The design of its elements is described and improvement of HTSC transformer performance characteristics compared to conventional power transformers with the same power rating is shown.
About the authors
E. P. Volkov
OJSC Krzhizhanovsky Power Engineering Institute
Author for correspondence.
Email: cryogen@eninnet.ru
Russian Federation, Moscow
E. A. Dzhafarov
OJSC Krzhizhanovsky Power Engineering Institute
Email: cryogen@eninnet.ru
Russian Federation, Moscow
L. S. Fleishman
OJSC Krzhizhanovsky Power Engineering Institute
Email: cryogen@eninnet.ru
Russian Federation, Moscow
V. S. Vysotsky
OJSC Russian Scientific Research and Development Cable Institute
Email: cryogen@eninnet.ru
Russian Federation, Moscow
V. V. Sukonkin
LLC MELDIS
Email: cryogen@eninnet.ru
Russian Federation, Moscow