Technology for Oil Sludge Disposal Based on Liquid and Supercritical Fluid Extraction with Propane–Butane Extractant
- Авторы: Gumerov F.M.1, Farakhov M.I.2, Khairutdinov V.F.1
-
Учреждения:
- Kazan National Research Technological University
- OOO Engineering Promotional Center Inzhekhim
- Выпуск: Том 51, № 6 (2017)
- Страницы: 972-979
- Раздел: American-Russian Chemical Engineering Scientific School “Modeling and Optimization of Chemical Engineering Processes and Systems” May 23–25, 2016 (Kazan National Research Technological University)
- URL: https://journals.rcsi.science/0040-5795/article/view/171823
- DOI: https://doi.org/10.1134/S0040579517060069
- ID: 171823
Цитировать
Аннотация
The results of using the processes of liquid and supercritical fluid extraction to separate petroleum products from oil sludge have been presented. A mixture that consists of 75 wt % propane and 25 wt % butane has been used as an extractant. The initial oil sludge is characterized by the absence of water and a content of mechanical impurities in the amount of 12.05 wt %. Extraction processes are carried out in the temperature range of 85–160°C and pressure interval of 5–50 MPa. The results of modeling the extraction process for the separation of petroleum products from oil sludge have been presented.
Ключевые слова
Об авторах
F. Gumerov
Kazan National Research Technological University
Автор, ответственный за переписку.
Email: kvener@yandex.ru
Россия, Kazan, 420015 Tatarstan
M. Farakhov
OOO Engineering Promotional Center Inzhekhim
Email: kvener@yandex.ru
Россия, Kazan, 420049 Tatarstan
V. Khairutdinov
Kazan National Research Technological University
Email: kvener@yandex.ru
Россия, Kazan, 420015 Tatarstan
Дополнительные файлы
