Effect of the Martensite Content on the Mechanical Behavior and the Acoustic Emission Characteristics of a Sheet TRIP Steel during Static Tension
- 作者: Teren’tev V.1, Roshchupkin V.1, Penkin A.2, Penkin M.3
-
隶属关系:
- Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences
- ZAO Special Diagnostic Systems
- Moscow State University
- 期: 卷 2019, 编号 10 (2019)
- 页面: 1091-1095
- 栏目: Applied Problems of Strength and Plasticity
- URL: https://journals.rcsi.science/0036-0295/article/view/173628
- DOI: https://doi.org/10.1134/S003602951910029X
- ID: 173628
如何引用文章
详细
Abstract—The results of studying the mechanical behavior of a 23Kh15N5AM3-Sh (VNS9-Sh) sheet TRIP steel with various initial martensite contents during static tension are supplemented and generalized. A correlation between the type of stress–strain curve and the acoustic emission (AE) signal activity and power, on the one hand, and the change in the strain-induced martensite content in the surface layers of the TRIP steel during static tension, on the other, is found and analyzed. The TRIP steel in an austenitic–martensitic state with approximately the same phase contents is found to have the optimum mechanical properties.
作者简介
V. Teren’tev
Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences
编辑信件的主要联系方式.
Email: fatig@mail.ru
俄罗斯联邦, Moscow, 119991
V. Roshchupkin
Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences
Email: fatig@mail.ru
俄罗斯联邦, Moscow, 119991
A. Penkin
ZAO Special Diagnostic Systems
Email: fatig@mail.ru
俄罗斯联邦, Moscow, 119991
M. Penkin
Moscow State University
Email: fatig@mail.ru
俄罗斯联邦, Moscow, 119991