电邮这篇文章 Adhesion Strength of Ceramic Coatings to Dental Ni–Cr Alloy Fabricated by Casting with 3D Printed Patterns
- 作者: Dikova T.1, Dolgov N.2, Vasilev T.3, Katreva I.1
-
隶属关系:
- Medical University of Varna
- Pisarenko Institute for Problems of Strength, National Academy of Sciences of Ukraine
- Nikola Vaptsarov Naval Academy
- 期: 卷 2019, 编号 4 (2019)
- 页面: 385-391
- 栏目: Advanced Materials and Technologies
- URL: https://journals.rcsi.science/0036-0295/article/view/173174
- DOI: https://doi.org/10.1134/S0036029519040086
- ID: 173174
如何引用文章
开放存取
##reader.subscriptionAccessGranted##
订阅存取
详细
The adhesion of IPS InLine ceramics to a cast dental Ni–Cr (Wiron light) alloy is experimentally studied during the tensile test of flat coated specimens, and the results of a numerical simulation and multicriteria optimization using the MADMML software package are presented. Casting patterns were printed on a 3D Rapidshape printer at angles of 0° and 90° by a layer 35 and 50 μm thick. The adhesion strength of the coating is 77.9–79.9 MPa under optimum conditions.
作者简介
Ts. Dikova
Medical University of Varna
编辑信件的主要联系方式.
Email: tsanka_dikova@abv.bg
保加利亚, Varna
N. Dolgov
Pisarenko Institute for Problems of Strength, National Academy of Sciences of Ukraine
Email: tsanka_dikova@abv.bg
乌克兰, Kiev
T. Vasilev
Nikola Vaptsarov Naval Academy
Email: tsanka_dikova@abv.bg
保加利亚, Varna
I. Katreva
Medical University of Varna
Email: tsanka_dikova@abv.bg
保加利亚, Varna
