Formation of an Intermetallic Layer during Arc Facing of Aluminum Alloys onto a Steel Substrate
- Авторы: Kovalev V.1, Mikheev R.1, Kobernik N.1, Galinovskiy A.2,3, Ershov I.3
-
Учреждения:
- Department of Welding and Diagnostics
- Department of Technologies of Rocket-Space Mechanical Engineering
- OOO Technological Center TENA
- Выпуск: Том 2017, № 13 (2017)
- Страницы: 1118-1124
- Раздел: Physical Metallurgy. Thermal and Thermochemical Treatment Technologies
- URL: https://journals.rcsi.science/0036-0295/article/view/171926
- DOI: https://doi.org/10.1134/S0036029517130122
- ID: 171926
Цитировать
Аннотация
Aluminum alloys, the composition of which is close to the matrix alloy of a composite antifriction materials, are deposited onto a steel substrate with a 10-μm-thick zinc coating. An aluminum coating on a steel substrate is formed by manual argon-arc facing with a nonconsumable electrode, arc facing using the cold metal transfer technology, and the technology that combined these methods with remelting of the first layer. The influence of the rate of energy input in facing and the alloying elements in a filler material (silicon is used as an example) on the kinetics of formation and growth of an intermetallic layer at the interface during the deposition of an aluminum layer onto a steel substrate is studied.
Об авторах
V. Kovalev
Department of Welding and Diagnostics
Email: galcomputer@mail.ru
Россия, Moscow
R. Mikheev
Department of Welding and Diagnostics
Email: galcomputer@mail.ru
Россия, Moscow
N. Kobernik
Department of Welding and Diagnostics
Email: galcomputer@mail.ru
Россия, Moscow
A. Galinovskiy
Department of Technologies of Rocket-Space Mechanical Engineering; OOO Technological Center TENA
Автор, ответственный за переписку.
Email: galcomputer@mail.ru
Россия, Moscow; Moscow
I. Ershov
OOO Technological Center TENA
Email: galcomputer@mail.ru
Россия, Moscow