| Edição |
Título |
Arquivo |
| Volume 2019, Nº 12 (2019) |
Structure-Sensitive Properties of Liquid Steel: Efficacy Evaluation of Its Treatment with Modifiers and Refining Slag |
(Eng)
|
|
Sheshukov O., Nekrasov I., Konashkov V., Yegiazaryan D.
|
| Volume 2019, Nº 12 (2019) |
Effect of Arcing on the Electrical Parameters and the Technical-and-Economic Indices of an Arc Furnace |
(Eng)
|
|
Mironov Y.
|
| Volume 2019, Nº 12 (2019) |
Improvement of the Electric Arc Furnace Manufacture of R6M5 Steel |
(Eng)
|
|
Gertsyk S., Korolev M., Shil’nikov E.
|
| Volume 2019, Nº 6 (2019) |
Steel Semiproduct Melting Intensification in Electric Arc Furnaces Using Coordinated Control of Electric and Gas Conditions: II. On-Line Control of the State of the Charge and Melt Zones in Electric Arc Furnaces |
(Eng)
|
|
Sivtsov A., Sheshukov O., Tsymbalist M., Nekrasov I., Makhnutin A., Egiazar’yan D., Orlov P.
|
| Volume 2018, Nº 12 (2018) |
Structural and Phase Characteristics of the Ni3Al-Based Intermetallic Alloy Fabricated by High-Gradient Directional Solidification and Selective Laser Melting |
(Eng)
|
|
Petrushin N., Arginbaeva E., Elyutin E., Treninkov I.
|
| Volume 2018, Nº 12 (2018) |
Steel Semiproduct Melting Intensification in Electric Arc Furnaces Using Coordinated Control of Electric and Gas Conditions: I. Heat Exchange and Structure of the Electric Arc Furnace Laboratory |
(Eng)
|
|
Sivtsov A., Sheshukov O., Tsymbalist M., Nekrasov I., Makhnutin A., Egiazar’yan D., Orlov P.
|
| Volume 2018, Nº 6 (2018) |
Plasma Carbothermic Reduction of Rare-Earth Metals |
(Eng)
|
|
Cherednichenko V., An’shakov A., Serikov V., Faleev V.
|
| Volume 2018, Nº 6 (2018) |
Determination of the Oxygen Content in the Complexly Alloyed Nickel Melts during Vacuum Induction Melting Using Oxygen Probes |
(Eng)
|
|
Rigin V., Sidorov V., Kosenkov O.
|
| Volume 2018, Nº 6 (2018) |
Development of a Process for Manufacturing a 29N26KKhBTYu-VI Precision Alloy |
(Eng)
|
|
Maznichevsky A., Sprikut R., Dvoryashina L., Sosedova O., Strepanova M.
|
| Volume 2018, Nº 6 (2018) |
Structure and Mechanical Properties of High-Strength Structural Steels |
(Eng)
|
|
Bannykh O., Sorokin A., Bannykh I., Lukin E.
|
| Volume 2017, Nº 12 (2017) |
Effect of Secondary Melt Refining on the Properties of an EP602 Nickel Superalloy |
(Eng)
|
|
Tyagunov A., Baryshev E., Tyagunov G., Shmakova K.
|
| Volume 2017, Nº 12 (2017) |
Electric Melting of Iron-Ore Prereduced Pellets in an Electric Arc Furnace |
(Eng)
|
|
Merker E., Krakht L., Malakhova O., Kozhukhov A., Chermenev E., Kazartsev V., Stepanov V.
|
| Volume 2017, Nº 12 (2017) |
Behavior of Rare-Earth Metals in Vacuum Melting and Directional Solidification of Nickel Superalloys |
(Eng)
|
|
Sidorov V., Min P.
|
| Volume 2017, Nº 12 (2017) |
Directional Solidification, Structure, and Mechanical Properties of a Eutectic Nb–Si Alloy with a Natural Composite Structure for GTE Blades |
(Eng)
|
|
Bondarenko Y., Echin A., Kolodyazhnyi M., Narskii A.
|
| Volume 2017, Nº 6 (2017) |
Adjusting characteristics of electric arc furnaces |
(Eng)
|
|
Mironov Y., Mironova A., Mikhadarov D.
|
| Volume 2017, Nº 6 (2017) |
In situ formation of the composite structure of a eutectic Nb–Si alloy during directional solidification in a liquid-metal coolant |
(Eng)
|
|
Bondarenko Y., Echin A., Kolodyazhnyi M.
|
| Volume 2016, Nº 12 (2016) |
Melting of pellets during arc heating with an analysis of the metal loss in the subelectrode space in a steelmaking bath |
(Eng)
|
|
Merker E., Sazonov A., Stepanov V., Krakht L., Kharlamov D.
|
| Volume 2016, Nº 6 (2016) |
Acoustic characteristics of electric arc furnaces |
(Eng)
|
|
Cherednichenko V., Bikeev R., Cherednichenko A., Ognev A.
|
| 1 - 18 de 18 resultados |
|
