| Edição |
Título |
Arquivo |
| Volume 2019, Nº 11 (2019) |
Development of Gas Porosity along the Ion Range in Vanadium Alloys during Sequential Helium and Hydrogen Ion Irradiation |
(Eng)
|
|
Stal’tsov M., Chernov I., Kalin B., Korshunov S., Lagov P.
|
| Volume 2019, Nº 11 (2019) |
High-Temperature β-NiAl + γ'-Ni3Al + γ-Ni Alloys of the Ni–Al–Co System |
(Eng)
|
|
Povarova K., Bazyleva O., Drozdov A., Morozov A., Antonova A., Sirotinkin V., Bulakhtina M., Arginbaeva E., Alad’ev N.
|
| Volume 2019, Nº 11 (2019) |
Influence of Sulfur on the Plasma Decarburization and Desulfurization of Corrosion-Resistant Steels |
(Eng)
|
|
Grigorovich K., Komolova O., Rumyantsev B.
|
| Volume 2019, Nº 11 (2019) |
Nanoindentation Study of the Effect of Low-Temperature Ion Irradiation on the Hardness of a Ferritic–Martensitic EK-181 Steel |
(Eng)
|
|
Nikitin A., Rogozhkin S., Kulevoi T., Fedin P., Iskandarov N., Kravchuk K., Gladkikh E., Leont’eva-Smirnova M., Mozhanov E.
|
| Volume 2019, Nº 11 (2019) |
Effect of the Charge Mixing Time on the Magnetic Hysteretic Properties of a Hard Magnetic Powder Fe–30% Cr–8% Co Alloy |
(Eng)
|
|
Alymov M., Zelenskii V., Milyaev I., Ustyukhin A., Ankudinov A., Abashev D., Petrakova N.
|
| Volume 2019, Nº 11 (2019) |
Effect of the Deformation during Pressure Welding of a Wrought EP975 Nickel Alloy and a Single-Crystal Intermetallic VKNA-25 Alloy on the Structure and Properties of the Welded Joints |
(Eng)
|
|
Drozdov A., Povarova K., Valitov V., Bazyleva O., Galieva E., Bulakhtina M., Arginbaeva E.
|
| Volume 2019, Nº 11 (2019) |
Criteria for the Rational Copper Infiltration of a Porous Refractory Skeleton during the Production of a W–Cu Pseudoalloy |
(Eng)
|
|
Bondarenko G., Korzhavyi A., Prasitskii V., Prasitskii G.
|
| Volume 2019, Nº 11 (2019) |
A Study of the Magnetic Characteristics of Cu–Mn–Bi Alloys |
(Eng)
|
|
Samoilova O., Trofimov E., Geraskin V.
|
| Volume 2019, Nº 11 (2019) |
Viscosity of Molten Brass and Copper Used for Quality Control in the Charge–Melt–Ingot Chain |
(Eng)
|
|
Tkachuk G., Chikova O., V’yukhin V.
|
| Volume 2019, Nº 11 (2019) |
Monitoring of the Metal Surface Temperature during Laser Processing |
(Eng)
|
|
Firago V., Wojcik W., Dzhunisbekov M.
|
| Volume 2019, Nº 11 (2019) |
Effect of Additional Hydrogen Alloying on the Structure and the Phase Composition of a VTI-4 Intermetallic Alloy |
(Eng)
|
|
Skvortsova S., Pozhoga O., Pozhoga V., Ivanov A.
|
| Volume 2019, Nº 9 (2019) |
Effect of Hot Isostatic Pressing on the Structure and the Mechanical Properties of an Al–7Si–7Cu Composite Alloy |
(Eng)
|
|
Akopyan T., Belov N., Padalko A., Letyagin N.
|
| Volume 2019, Nº 9 (2019) |
Continuous Casting of Aluminum Alloys Combined with Their Deformation during Solidification |
(Eng)
|
|
Sergeeva A., Lovizin N., Sosnin A.
|
| Volume 2019, Nº 9 (2019) |
Effect of the Technological Parameters of the Aluminothermic Reduction of Erbium Oxide in Chloride–Fluoride Melts on the Transition of Erbium to a Master Alloy |
(Eng)
|
|
Kosov Y., Bazhin V., Kopylova T.
|
| Volume 2019, Nº 9 (2019) |
Structure and Properties of Alloy Ti–6Al–4V Samples Fabricated by 3D Printing |
(Eng)
|
|
Skvortsova S., German M., Spektor V.
|
| Volume 2019, Nº 9 (2019) |
Waste Slime of the V2O5 Production according to the Lime–Sulfuric Acid Technology as a Technical Raw Material for Vanadium Recovery |
(Eng)
|
|
Sadykhov G., Goncharov K., Olyunina T., Kashekov D.
|
| Volume 2019, Nº 9 (2019) |
Electrical Resistivity as a Comparative Characteristic for the Metallurgical Evaluation of Manganese and Chromium Ore Raw Materials |
(Eng)
|
|
Zhdanov A.
|
| Volume 2019, Nº 9 (2019) |
Low-Cycle Fatigue of a VZh175 Nickel Superalloy during Asymmetric Loading |
(Eng)
|
|
Gorbovets M., Khodinev I., Belyaev M., Ryzhkov P.
|
| Volume 2019, Nº 9 (2019) |
Effect of Annealing on the Structure and the Hardness of Die Steel with a Controllable Austenitic Transformation during Operation |
(Eng)
|
|
Kruglyakov A., Nikulin S., Rogachev S., Lebedeva N., Panova G., Nguen H., Serikov E.
|
| Volume 2019, Nº 9 (2019) |
Effect of Preliminary Hydroabrasive Cutting on the Imperfection of Welded Joints and Their Mechanical Properties |
(Eng)
|
|
Tabatchikova T., Morozova A., Gudnev N.
|
| Volume 2019, Nº 9 (2019) |
Mathematical Simulation of the Melting of Nitrided Ferroalloys in an Iron–Carbon Melt |
(Eng)
|
|
Zayakin O., Smirnov L., Zhuchkov V., Lozovaya E.
|
| Volume 2019, Nº 9 (2019) |
Time and Temperature Dependences of the Irreversible Magnetization Losses of Sintered Pr–Dy–Fe–Co–B Magnets |
(Eng)
|
|
Rezchikova I., Moiseeva N., Valeev R., Morgunov R., Piskorskii V.
|
| Volume 2019, Nº 9 (2019) |
Electrical Conductivity of Ammonia–Alkali Solutions and Its Activation Energy |
(Eng)
|
|
Kuznetsova O., Levin A., Sevost’yanov M., Tsybin O., Bol’shikh A.
|
| Volume 2019, Nº 8 (2019) |
Liquidus Temperatures of KF–KCl–KI Melts |
(Eng)
|
|
Khudorozhkova A., Isakov A., Red’kin A., Zaikov Y.
|
| Volume 2019, Nº 8 (2019) |
Effective Wills–Harrison Pair Interaction in Liquid Au |
(Eng)
|
|
Dubinin N., Bhuiyan G., Abbas F.
|
| 1 - 25 de 453 resultados |
1 2 3 4 5 6 7 8 9 10 > >>
|
