Creep of a Titanium Nickelide-Based Alloy during Torsional Deformation
- Autores: Gusev D.1, Kollerov M.1, Sharonov A.1, Vinogradov R.1
-
Afiliações:
- Moscow Aviation Institute (National Research University)
- Edição: Volume 2019, Nº 3 (2019)
- Páginas: 223-231
- Seção: Article
- URL: https://journals.rcsi.science/0036-0295/article/view/173105
- DOI: https://doi.org/10.1134/S0036029519030042
- ID: 173105
Citar
Resumo
The short-term creep processes in a Ti–55.7 wt % Ni alloy are investigated. Wire samples of this alloy after preliminary annealing at 450–700°C are deformed by torsion under constant loading in an air atmosphere in the temperatures range 450–550°C. The effect of structural parameters (grain size, presence of fine Ti3Ni4 particles) on the creep mechanism and rate is shown. Grain-boundary diffusion is found to be one of the main creep mechanisms.
Palavras-chave
Sobre autores
D. Gusev
Moscow Aviation Institute (National Research University)
Autor responsável pela correspondência
Email: mitom@implants.ru
Rússia, Moscow, 125993
M. Kollerov
Moscow Aviation Institute (National Research University)
Email: mitom@implants.ru
Rússia, Moscow, 125993
A. Sharonov
Moscow Aviation Institute (National Research University)
Email: mitom@implants.ru
Rússia, Moscow, 125993
R. Vinogradov
Moscow Aviation Institute (National Research University)
Email: mitom@implants.ru
Rússia, Moscow, 125993
![](/img/style/loading.gif)