Enviar artigo por via de e-mail Machining of Machine Elements Made of Polymer Composite Materials
- Autores: Baurova N.1, Makarov K.1
-
Afiliações:
- Moscow Automobile and Road Construction State Technical University (MADI)
- Edição: Volume 2017, Nº 13 (2017)
- Páginas: 1141-1144
- Seção: Machining of Blanks and Assembly
- URL: https://journals.rcsi.science/0036-0295/article/view/171935
- DOI: https://doi.org/10.1134/S0036029517130043
- ID: 171935
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
The machining of the machine elements that are made of polymer composite materials (PCMs) or are repaired using them is considered. Turning, milling, and drilling are shown to be most widely used among all methods of cutting PCMs. Cutting conditions for the machining of PCMs are presented. The factors that most strongly affect the roughness parameters and the accuracy of cutting PCMs are considered.
Palavras-chave
Sobre autores
N. Baurova
Moscow Automobile and Road Construction State Technical University (MADI)
Autor responsável pela correspondência
Email: nbaurova@mail.ru
Rússia, Moscow
K. Makarov
Moscow Automobile and Road Construction State Technical University (MADI)
Email: nbaurova@mail.ru
Rússia, Moscow
