Enviar artigo por via de e-mail Effect of dynamical chemical etching on the porous structure parameters of superelastic medical Ti–Nb–Zr alloy foam
- Autores: Sheremetyev V.1, Dubinskiy S.1, Ikbal’ M.1, Korobkova A.1, Kazakbiev A.1, Prokoshkin S.1, Brailovski V.2
-
Afiliações:
- National University of Science and Technology MISiS
- Ecole de Technologie Superieure
- Edição: Volume 2017, Nº 10 (2017)
- Páginas: 789-793
- Seção: Advanced Materials and Technologies
- URL: https://journals.rcsi.science/0036-0295/article/view/171736
- DOI: https://doi.org/10.1134/S0036029517100226
- ID: 171736
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
A dynamical chemical etching technique under pressure is developed and used to fabricate sintered foams based on a superelastic Ti–Nb–Zr alloy. This technique is shown to effectively control the characteristics of a porous structure and to increase the porosity and the permeability of the material.
Palavras-chave
Sobre autores
V. Sheremetyev
National University of Science and Technology MISiS
Autor responsável pela correspondência
Email: sheremetyev@misis.ru
Rússia, Leninskii pr. 4, Moscow, 119049
S. Dubinskiy
National University of Science and Technology MISiS
Email: sheremetyev@misis.ru
Rússia, Leninskii pr. 4, Moscow, 119049
M. Ikbal’
National University of Science and Technology MISiS
Email: sheremetyev@misis.ru
Rússia, Leninskii pr. 4, Moscow, 119049
A. Korobkova
National University of Science and Technology MISiS
Email: sheremetyev@misis.ru
Rússia, Leninskii pr. 4, Moscow, 119049
A. Kazakbiev
National University of Science and Technology MISiS
Email: sheremetyev@misis.ru
Rússia, Leninskii pr. 4, Moscow, 119049
S. Prokoshkin
National University of Science and Technology MISiS
Email: sheremetyev@misis.ru
Rússia, Leninskii pr. 4, Moscow, 119049
V. Brailovski
Ecole de Technologie Superieure
Email: sheremetyev@misis.ru
Canadá, Montreal, 1100
