Influence of heat treatment on the efficiency of impact fragmentation of amorphous alloy Fe73.5Cu1Nb3Si13.5B9 ribbons
- Autores: Kuznetsov P.1, Samodelkin E.1, Klimov V.1, Kashirina A.1
-
Afiliações:
- Central Research Institute of Structural Materials Prometey
- Edição: Volume 2017, Nº 4 (2017)
- Páginas: 293-297
- Seção: Applied Problems of Strength and Plasticity
- URL: https://journals.rcsi.science/0036-0295/article/view/171423
- DOI: https://doi.org/10.1134/S0036029517040115
- ID: 171423
Citar
Resumo
The mechanism of impact fracture of soft magnetic amorphous alloy Fe73.5Cu1Nb3Si13.5B9 ribbons in a disintegrator after heat treatment at a temperature from the range 300–700°C and the fractional composition of the formed powder are studied. The temperature ranges of a change in the mechanism of ribbon fracture are determined. The particle size distribution is shown to change weakly within the revealed temperature ranges.
Palavras-chave
Sobre autores
P. Kuznetsov
Central Research Institute of Structural Materials Prometey
Email: npk3@crism.ru
Rússia, ul. Shpalernaya 49, St. Petersburg, 191015
E. Samodelkin
Central Research Institute of Structural Materials Prometey
Autor responsável pela correspondência
Email: npk3@crism.ru
Rússia, ul. Shpalernaya 49, St. Petersburg, 191015
V. Klimov
Central Research Institute of Structural Materials Prometey
Email: npk3@crism.ru
Rússia, ul. Shpalernaya 49, St. Petersburg, 191015
A. Kashirina
Central Research Institute of Structural Materials Prometey
Email: npk3@crism.ru
Rússia, ul. Shpalernaya 49, St. Petersburg, 191015