Мақаланы E-mail арқылы жіберу Fatigue strength of a Ti–6Al–4V alloy produced by selective laser melting
- Авторлар: Gerov M.1, Vladislavskaya E.1, Terent’ev V.2, Prosvirnin D.2, Kolmakov A.2, Antonova O.2
-
Мекемелер:
- AO Corporation Moscow Heat Engineering Institute MIT
- Baikov Institute of Metallurgy and Materials Science
- Шығарылым: Том 2016, № 10 (2016)
- Беттер: 935-941
- Бөлім: Promising Materials and Technologies
- URL: https://journals.rcsi.science/0036-0295/article/view/170925
- DOI: https://doi.org/10.1134/S0036029516100049
- ID: 170925
Дәйексөз келтіру
Ашық рұқсат
Рұқсат берілді
Тек жазылушылар үшін
Аннотация
The fatigue properties and the fracture mechanisms of the Ti–6Al–4V alloy produced by selective laser melting (SLM) from a powder of an CL41TiELI titanium alloy have been studied. Cylindrical blanks were grown at angles of 90° and 45° to a platform. The best fatigue strength is observed in the samples the blanks of which were grown at an angle of 45°. It is found that the structure of the SLM material can contain portions with unmelted powder particles, which are the places of initiation of fatigue cracks.
Авторлар туралы
M. Gerov
AO Corporation Moscow Heat Engineering Institute MIT
Хат алмасуға жауапты Автор.
Email: zodom@mail.ru
Ресей, alleya Berezovaya 10, Moscow, 127273
E. Vladislavskaya
AO Corporation Moscow Heat Engineering Institute MIT
Email: fatig@mail.ru
Ресей, alleya Berezovaya 10, Moscow, 127273
V. Terent’ev
Baikov Institute of Metallurgy and Materials Science
Хат алмасуға жауапты Автор.
Email: fatig@mail.ru
Ресей, Leninskii pr. 49, Moscow, 119991
D. Prosvirnin
Baikov Institute of Metallurgy and Materials Science
Email: fatig@mail.ru
Ресей, Leninskii pr. 49, Moscow, 119991
A. Kolmakov
Baikov Institute of Metallurgy and Materials Science
Email: fatig@mail.ru
Ресей, Leninskii pr. 49, Moscow, 119991
O. Antonova
Baikov Institute of Metallurgy and Materials Science
Email: fatig@mail.ru
Ресей, Leninskii pr. 49, Moscow, 119991
