Issue |
Title |
File |
Vol 2019, No 11 (2019) |
Viscosity of Molten Brass and Copper Used for Quality Control in the Charge–Melt–Ingot Chain |
(Eng)
|
Tkachuk G.A., Chikova O.A., V’yukhin V.V.
|
Vol 2019, No 11 (2019) |
Monitoring of the Metal Surface Temperature during Laser Processing |
(Eng)
|
Firago V.A., Wojcik W., Dzhunisbekov M.S.
|
Vol 2019, No 11 (2019) |
Effect of Additional Hydrogen Alloying on the Structure and the Phase Composition of a VTI-4 Intermetallic Alloy |
(Eng)
|
Skvortsova S.V., Pozhoga O.Z., Pozhoga V.A., Ivanov A.E.
|
Vol 2019, No 11 (2019) |
Development of Gas Porosity along the Ion Range in Vanadium Alloys during Sequential Helium and Hydrogen Ion Irradiation |
(Eng)
|
Stal’tsov M.S., Chernov I.I., Kalin B.A., Korshunov S.N., Lagov P.B.
|
Vol 2019, No 11 (2019) |
High-Temperature β-NiAl + γ'-Ni3Al + γ-Ni Alloys of the Ni–Al–Co System |
(Eng)
|
Povarova K.B., Bazyleva O.A., Drozdov A.A., Morozov A.E., Antonova A.V., Sirotinkin V.P., Bulakhtina M.A., Arginbaeva E.G., Alad’ev N.A.
|
Vol 2019, No 11 (2019) |
Influence of Sulfur on the Plasma Decarburization and Desulfurization of Corrosion-Resistant Steels |
(Eng)
|
Grigorovich K.V., Komolova O.A., Rumyantsev B.A.
|
Vol 2019, No 11 (2019) |
Nanoindentation Study of the Effect of Low-Temperature Ion Irradiation on the Hardness of a Ferritic–Martensitic EK-181 Steel |
(Eng)
|
Nikitin A.A., Rogozhkin S.V., Kulevoi T.V., Fedin P.A., Iskandarov N.A., Kravchuk K.S., Gladkikh E.V., Leont’eva-Smirnova M.V., Mozhanov E.M.
|
Vol 2019, No 11 (2019) |
Effect of the Charge Mixing Time on the Magnetic Hysteretic Properties of a Hard Magnetic Powder Fe–30% Cr–8% Co Alloy |
(Eng)
|
Alymov M.I., Zelenskii V.A., Milyaev I.M., Ustyukhin A.S., Ankudinov A.B., Abashev D.M., Petrakova N.V.
|
Vol 2019, No 11 (2019) |
Effect of the Deformation during Pressure Welding of a Wrought EP975 Nickel Alloy and a Single-Crystal Intermetallic VKNA-25 Alloy on the Structure and Properties of the Welded Joints |
(Eng)
|
Drozdov A.A., Povarova K.B., Valitov V.A., Bazyleva O.A., Galieva E.V., Bulakhtina M.A., Arginbaeva E.G.
|
Vol 2019, No 11 (2019) |
Criteria for the Rational Copper Infiltration of a Porous Refractory Skeleton during the Production of a W–Cu Pseudoalloy |
(Eng)
|
Bondarenko G.G., Korzhavyi A.P., Prasitskii V.V., Prasitskii G.V.
|
Vol 2019, No 11 (2019) |
A Study of the Magnetic Characteristics of Cu–Mn–Bi Alloys |
(Eng)
|
Samoilova O.V., Trofimov E.A., Geraskin V.I.
|
Vol 2019, No 9 (2019) |
Electrical Resistivity as a Comparative Characteristic for the Metallurgical Evaluation of Manganese and Chromium Ore Raw Materials |
(Eng)
|
Zhdanov A.V.
|
Vol 2019, No 9 (2019) |
Low-Cycle Fatigue of a VZh175 Nickel Superalloy during Asymmetric Loading |
(Eng)
|
Gorbovets M.A., Khodinev I.A., Belyaev M.S., Ryzhkov P.V.
|
Vol 2019, No 9 (2019) |
Effect of Annealing on the Structure and the Hardness of Die Steel with a Controllable Austenitic Transformation during Operation |
(Eng)
|
Kruglyakov A.A., Nikulin S.A., Rogachev S.O., Lebedeva N.V., Panova G.A., Nguen H.S., Serikov E.V.
|
Vol 2019, No 9 (2019) |
Effect of Preliminary Hydroabrasive Cutting on the Imperfection of Welded Joints and Their Mechanical Properties |
(Eng)
|
Tabatchikova T.I., Morozova A.N., Gudnev N.Z.
|
Vol 2019, No 9 (2019) |
Mathematical Simulation of the Melting of Nitrided Ferroalloys in an Iron–Carbon Melt |
(Eng)
|
Zayakin O.V., Smirnov L.A., Zhuchkov V.I., Lozovaya E.Y.
|
Vol 2019, No 9 (2019) |
Time and Temperature Dependences of the Irreversible Magnetization Losses of Sintered Pr–Dy–Fe–Co–B Magnets |
(Eng)
|
Rezchikova I.I., Moiseeva N.S., Valeev R.A., Morgunov R.B., Piskorskii V.P.
|
Vol 2019, No 9 (2019) |
Electrical Conductivity of Ammonia–Alkali Solutions and Its Activation Energy |
(Eng)
|
Kuznetsova O.G., Levin A.M., Sevost’yanov M.A., Tsybin O.I., Bol’shikh A.O.
|
Vol 2019, No 9 (2019) |
Effect of Hot Isostatic Pressing on the Structure and the Mechanical Properties of an Al–7Si–7Cu Composite Alloy |
(Eng)
|
Akopyan T.K., Belov N.A., Padalko A.G., Letyagin N.V.
|
Vol 2019, No 9 (2019) |
Continuous Casting of Aluminum Alloys Combined with Their Deformation during Solidification |
(Eng)
|
Sergeeva A.M., Lovizin N.S., Sosnin A.A.
|
Vol 2019, No 9 (2019) |
Effect of the Technological Parameters of the Aluminothermic Reduction of Erbium Oxide in Chloride–Fluoride Melts on the Transition of Erbium to a Master Alloy |
(Eng)
|
Kosov Y.I., Bazhin V.Y., Kopylova T.N.
|
Vol 2019, No 9 (2019) |
Structure and Properties of Alloy Ti–6Al–4V Samples Fabricated by 3D Printing |
(Eng)
|
Skvortsova S.V., German M.A., Spektor V.S.
|
Vol 2019, No 9 (2019) |
Waste Slime of the V2O5 Production according to the Lime–Sulfuric Acid Technology as a Technical Raw Material for Vanadium Recovery |
(Eng)
|
Sadykhov G.B., Goncharov K.V., Olyunina T.V., Kashekov D.Y.
|
Vol 2019, No 8 (2019) |
On the Theory of the Nonstationary Spherical Crystal Growth in Supercooled Melts and Supersaturated Solutions |
(Eng)
|
Alexandrov D.V., Alexandrova I.V., Ivanov A.A., Malygin A.P., Starodumov I.O., Toropova L.V.
|
Vol 2019, No 8 (2019) |
Thermal Analysis of the Fabrication of Magnesium Master Alloys Containing Yttrium and Zinc |
(Eng)
|
Savchenkov S.A., Bazhin V.Y., Brichkin V.N., Ugolkov V.L.
|
1 - 25 of 453 Items |
1 2 3 4 5 6 7 8 9 10 > >>
|