Email this article Scanning probe microscopy estimation of the wear resistance of the surface of a modified PVC film
- Authors: Kochetkova A.S.1, Gorbushin P.N.1, Sosnov E.A.1, Kolert K.2, Malygin A.A.1
-
Affiliations:
- St. Petersburg State Technological Institute (Technological University)
- Klöckner Pentaplast Europ GmbH&Co Kg
- Issue: Vol 2017, No 4 (2017)
- Pages: 312-318
- Section: Diagnostics and Mechanical Test Techniques
- URL: https://journals.rcsi.science/0036-0295/article/view/171444
- DOI: https://doi.org/10.1134/S0036029517040097
- ID: 171444
Cite item
Open Access
Access granted
Subscription Access
Abstract
An atomic force microscopy technique is proposed to determine the wear resistance of a protective coating deposited by the sol–gel method on the surface of a polyvinylchloride film. The force of action of a probe on a sample is estimated under various scanning conditions. It is shown that the obtained data on the resistance of a coating to the action of a probe in the contact mode can be used to qualitatively estimate the adhesion of the coating to the surface of a polymer matrix.
About the authors
A. S. Kochetkova
St. Petersburg State Technological Institute (Technological University)
Author for correspondence.
Email: annywka_08@list.ru
Russian Federation, Moskovskii pr. 26, St. Petersburg, 190013
P. N. Gorbushin
St. Petersburg State Technological Institute (Technological University)
Email: annywka_08@list.ru
Russian Federation, Moskovskii pr. 26, St. Petersburg, 190013
E. A. Sosnov
St. Petersburg State Technological Institute (Technological University)
Email: annywka_08@list.ru
Russian Federation, Moskovskii pr. 26, St. Petersburg, 190013
K. Kolert
Klöckner Pentaplast Europ GmbH&Co Kg
Email: annywka_08@list.ru
Germany, Montabaur, 56401
A. A. Malygin
St. Petersburg State Technological Institute (Technological University)
Email: annywka_08@list.ru
Russian Federation, Moskovskii pr. 26, St. Petersburg, 190013
