Technologies of Production of Layered Composites
- Authors: Marycheva A.N.1, Guzeva T.A.1, P’e P.M.1, Tun L.K.1, Malysheva G.V.1
-
Affiliations:
- Bauman Moscow State Technical University
- Issue: Vol 2019, No 13 (2019)
- Pages: 1373-1377
- Section: New Materials. Technology of Composite Materials
- URL: https://journals.rcsi.science/0036-0295/article/view/173817
- DOI: https://doi.org/10.1134/S0036029519130214
- ID: 173817
Cite item
Abstract
Two technologies of single-part production of layered composites are considered, the main technological operations are normalized, and the properties of the prepared materials are considered. A nonwoven material with a honeycomb structure is used as one of the components of the layered composite material. The properties of the nonwoven material, foam plastic, honeycomb fillers, and spheroplastics are compared. The total time of impregnation of a layered composite material is theoretically and experimentally studied.
About the authors
A. N. Marycheva
Bauman Moscow State Technical University
Email: malyin@mail.ru
Russian Federation, Moscow
T. A. Guzeva
Bauman Moscow State Technical University
Email: malyin@mail.ru
Russian Federation, Moscow
P. M. P’e
Bauman Moscow State Technical University
Email: malyin@mail.ru
Russian Federation, Moscow
L. Kh. Tun
Bauman Moscow State Technical University
Email: malyin@mail.ru
Russian Federation, Moscow
G. V. Malysheva
Bauman Moscow State Technical University
Author for correspondence.
Email: malyin@mail.ru
Russian Federation, Moscow
Supplementary files
