Email this article Magnetic Properties of the Amorphous Fe–P–Si and Fe–P–Si–Mn–V–C Alloys Fabricated from Naturally Alloyed Ferrophosphorus and a 2NSR Alloy
- Authors: Kornienkov B.A.1, Vavilova V.V.2, Simakov S.V.2, Anosova M.O.2
-
Affiliations:
- Bardin Central Research Institute of Ferrous Metallurgy
- Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences
- Issue: Vol 2019, No 7 (2019)
- Pages: 721-726
- Section: Article
- URL: https://journals.rcsi.science/0036-0295/article/view/173365
- DOI: https://doi.org/10.1134/S0036029519070061
- ID: 173365
Cite item
Open Access
Access granted
Subscription Access
Abstract
Abstract—The estimation of the magnetic properties of the amorphous alloys Fe–P–Si and Fe–P–Si–Mn–V–C fabricated from naturally alloyed ferrophosphorus and a 2NSR-type alloy (Fe–Ni–Si–B–Nb–Cu) shows that they are comparable in saturation induction and coercive force. However, the materials made of ferrophosphorus have a lower cost and can be used as ferrocomposite materials.
About the authors
B. A. Kornienkov
Bardin Central Research Institute of Ferrous Metallurgy
Email: masha_anosova@mail.ru
Russian Federation, Moscow, 105005
V. V. Vavilova
Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences
Email: masha_anosova@mail.ru
Russian Federation, Moscow, 119334
S. V. Simakov
Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences
Email: masha_anosova@mail.ru
Russian Federation, Moscow, 119334
M. O. Anosova
Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences
Author for correspondence.
Email: masha_anosova@mail.ru
Russian Federation, Moscow, 119334
