Properties of the Composite Galvanic Coatings Fabricated Using the Dispersed Wastes of ShKh15 Steel
- Authors: Latypov R.A.1, Ageeva E.V.2, Latypova G.R.1
- 
							Affiliations: 
							- Moscow Polytechnic University
- Southwest State University
 
- Issue: Vol 2019, No 6 (2019)
- Pages: 632-635
- Section: Hardening and Coating Technologies
- URL: https://journals.rcsi.science/0036-0295/article/view/173304
- DOI: https://doi.org/10.1134/S0036029519060144
- ID: 173304
Cite item
Abstract
The properties of the composite galvanic coatings deposited using the powder fabricated by the electroerosion dispersion of the wastes of ShKh15 steel as a hardening phase are studied. The microhardness of this coating is shown to be higher than that of the coating deposited using a standard powder by 20%. The adhesion and cohesion strengths of the coating exceed 190 N.
About the authors
R. A. Latypov
Moscow Polytechnic University
							Author for correspondence.
							Email: latipov46@mail.ru
				                					                																			                												                	Russian Federation, 							Moscow, 115280						
E. V. Ageeva
Southwest State University
														Email: latipov46@mail.ru
				                					                																			                												                	Russian Federation, 							Kursk, 305040						
G. R. Latypova
Moscow Polytechnic University
														Email: latipov46@mail.ru
				                					                																			                												                	Russian Federation, 							Moscow, 115280						
Supplementary files
 
				
			 
					 
						 
						 
						 
						 
				 
  
  
  
  
  Email this article
			Email this article  Open Access
		                                Open Access Access granted
						Access granted Subscription Access
		                                		                                        Subscription Access
		                                					