Email this article Service Properties of the Thermoplastic Polymer Materials Used for Repairing Road-Building Machines
- Authors: Lapina N.V.1, Baurova N.I.1
-
Affiliations:
- Moscow Automobile and Road Construction State Technical University (MADI)
- Issue: Vol 2018, No 13 (2018)
- Pages: 1234-1237
- Section: Adhesive Joints
- URL: https://journals.rcsi.science/0036-0295/article/view/172812
- DOI: https://doi.org/10.1134/S0036029518130141
- ID: 172812
Cite item
Open Access
Access granted
Subscription Access
Abstract
The service properties of thermoplastic materials (molten adhesives) are studied to estimate the possibility of their application for repairing road-building machines. The swelling resistance of molten adhesives in working media, namely, water, motor oil, and antifreeze, is investigated. Dynamomechanical analysis is used to analyze the deformation properties of the molten adhesives. The adhesion strengths of the epoxy adhesives traditionally used in repairing machines and the thermoplastic molten adhesives are compared.
About the authors
N. V. Lapina
Moscow Automobile and Road Construction State Technical University (MADI)
Email: nbaurova@mail.ru
Russian Federation, Moscow
N. I. Baurova
Moscow Automobile and Road Construction State Technical University (MADI)
Author for correspondence.
Email: nbaurova@mail.ru
Russian Federation, Moscow
