Email this article Coating of a steel wire with copper
- Authors: Vdovin K.N.1, Dubskii G.A.1, Nefed’ev A.A.1, Derevyanko D.V.1
-
Affiliations:
- Magnitogorsk State Technical University
- Issue: Vol 2016, No 3 (2016)
- Pages: 250-255
- Section: Article
- URL: https://journals.rcsi.science/0036-0295/article/view/170419
- DOI: https://doi.org/10.1134/S0036029516030150
- ID: 170419
Cite item
Open Access
Access granted
Subscription Access
Abstract
The process of coating of a steel wire with liquid copper at a high speed (>1 m/s) is considered. The results of long-term studies of copperizing under laboratory conditions and electron-microscopic investigation of the copper–steel adhesion are used to develop a mathematical model for coating of a steel wire with copper and to create a commercial setup to implement this process.
About the authors
K. N. Vdovin
Magnitogorsk State Technical University
Author for correspondence.
Email: KN.Vdovin@gmail.com
Russian Federation, Magnitogorsk
G. A. Dubskii
Magnitogorsk State Technical University
Email: KN.Vdovin@gmail.com
Russian Federation, Magnitogorsk
A. A. Nefed’ev
Magnitogorsk State Technical University
Email: KN.Vdovin@gmail.com
Russian Federation, Magnitogorsk
D. V. Derevyanko
Magnitogorsk State Technical University
Email: KN.Vdovin@gmail.com
Russian Federation, Magnitogorsk
