Email this article Comparative Study of Chromium(VI) Removal from Simulated Industrial Wastewater with Ion Exchange Resins
- Authors: Xu D.1, Li X.2,1, Shi S.2,3,4, Cao H.2,3, Li Y.2,3
-
Affiliations:
- College of Chemistry and Environmental Engineering
- National Engineering Laboratory for Hydrometallurgical Cleaner Production Technology, Beijing Engineering Research Center of Process Pollution Control, Key Laboratory of Green Process and Engineering, Institute of Process Engineering
- University of Chinese Academy of Sciences
- Zhengzhou Institute of Emerging Industrial Technology
- Issue: Vol 92, No 6 (2018)
- Pages: 1229-1236
- Section: Physical Chemistry of Separation Processes. Chromatography
- URL: https://journals.rcsi.science/0036-0244/article/view/170040
- DOI: https://doi.org/10.1134/S0036024418060237
- ID: 170040
Cite item
Open Access
Access granted
Subscription Access
Abstract
Ion exchange process is an alternative technique for removal of heavy metal ions from industrial wastewater. The main aim of this paper is to evaluate the performance of different ion exchange resins in removing Cr(VI) from wastewater. The effects of resin types and dosage, initial pH were examined systemically. The results showed that the performance of different resins had obvious difference for the removal of the Cr(VI) ions, in which the type of functional groups of the resin was the main factor. The SEM images indicated that the micro-morphology of resins before and after adsorption of the Cr(VI) presented a little difference. The EDS analysis showed that the adsorbed Cr(VI) was uniformly distributed at the surface of the resins with formation of oxygen-containing groups. The adsorption isotherms and kinetics of Cr(VI) by the different resins are also discussed.
About the authors
Dongyao Xu
College of Chemistry and Environmental Engineering
Email: syshi@ipe.ac.cn
China, Beijing, 100083
Xiaofan Li
National Engineering Laboratory for Hydrometallurgical Cleaner Production Technology, Beijing Engineering Research Center of Process Pollution Control, Key Laboratory of Green Process and Engineering, Institute of Process Engineering; College of Chemistry and Environmental Engineering
Email: syshi@ipe.ac.cn
China, Beijing, 100190; Beijing, 100083
Shaoyuan Shi
National Engineering Laboratory for Hydrometallurgical Cleaner Production Technology, Beijing Engineering Research Center of Process Pollution Control, Key Laboratory of Green Process and Engineering, Institute of Process Engineering; University of Chinese Academy of Sciences; Zhengzhou Institute of Emerging Industrial Technology
Author for correspondence.
Email: syshi@ipe.ac.cn
China, Beijing, 100190; Beijing, 100049; Zhengzhou, 450000
Hongbin Cao
National Engineering Laboratory for Hydrometallurgical Cleaner Production Technology, Beijing Engineering Research Center of Process Pollution Control, Key Laboratory of Green Process and Engineering, Institute of Process Engineering; University of Chinese Academy of Sciences
Email: syshi@ipe.ac.cn
China, Beijing, 100190; Beijing, 100049
Yuping Li
National Engineering Laboratory for Hydrometallurgical Cleaner Production Technology, Beijing Engineering Research Center of Process Pollution Control, Key Laboratory of Green Process and Engineering, Institute of Process Engineering; University of Chinese Academy of Sciences
Email: syshi@ipe.ac.cn
China, Beijing, 100190; Beijing, 100049
