Effect of various kinds of severe plastic deformation on the structure and electromechanical properties of precipitation-strengthened CuCrZr alloy

Аннотация

The effect of various kinds of severe plastic deformation (equal-channel angular pressing and quasi-hydrostatic extrusion at 77 and 300 K) on the structural formation of precipitation-strengthened CuCrZr alloy has been studied. A combination of experimental methods has been used. Sputtering by deuterium ions was used as the tool for the layer-by-layer study of the alloy structure. The difference between the sputtering yields of the matrix (copper) and precipitates (Cr and Zr) allowed us to visualize the alloy structure to a total depth of 0.5−1 μm. The effect of severe plastic deformation on the precipitate distribution is considered. It has been shown that the main peculiarity of the microstructure is related to the high density of precipitates enriched in chromium, which completely determine the surface roughness. Their distribution is not related to the grain size. The combination of equal-channel angular pressing and quasi-hydrostatic extrusion was shown to lead to the increase in the microhardness of the CuCrZr alloy to 2300 MPa in the case of low-temperature quasi-hydrostatic extrusion (at 77 K) and to the retained high conductivity. It has been proved that the high anisotropy of precipitate shape, microhardness, and sputtering yield of the CuCrZr alloy is determined by equal-channel angular pressing.