High-strain-rate superplasticity of the Al–Zn–Mg–Cu alloys with Fe and Ni additions

详细

During high-strain-rate superplastic deformation, superplasticity indices, and the microstructure of two Al–Zn–Mg–Cu–Zr alloys with additions of nickel and iron, which contain equal volume fractions of eutectic particles of Al₃Ni or Al₉FeNi, have been compared. It has been shown that the alloys exhibit superplasticity with 300–800% elongations at the strain rates of 1 × 10^–2–1 × 10^–1 s^–1. The differences in the kinetics of alloy recrystallization in the course of heating and deformation at different temperatures and rates of the superplastic deformation, which are related to the various parameters of the particles of the eutectic phases, have been found. At strain rates higher than 4 × 10^–2, in the alloy with Fe and Ni, a partially nonrecrystallized structure is retained up to material failure and, in the alloy with Ni, a completely recrystallized structure is formed at rates of up to 1 × 10^–1 s^–1.