Issue |
Title |
File |
Vol 118, No 9 (2017) |
Experimental determination of Poisson’s ratio of a single crystal nickel heat-resistant alloy in the temperature range of 20–1000°C |
 (Eng)
|
Golynets S.A., Toloraiya V.N., Nekrasov S.N., Khvatskii K.K.
|
Vol 118, No 8 (2017) |
Evolution of the structure and mechanical properties of a bulk-nitrided corrosion-resistant ferritic steel upon tempering in the temperature range of 400–700°C |
 (Eng)
|
Rogachev S.O., Nikulin S.A., Khatkevich V.M.
|
Vol 118, No 8 (2017) |
Nitrogen alloying of the 12% Cr martensitic-ferritic steel |
 (Eng)
|
Kudryavtsev A.S., Artem’eva D.A., Mikhailov M.S.
|
Vol 118, No 8 (2017) |
On the precipitation strengthening of Cu–2.6Ni–0.6Si–0.6Cr bronzes |
 (Eng)
|
Kareva N.T., Yakovleva I.L., Samoilova O.V.
|
Vol 118, No 8 (2017) |
Is it possible for dislocations to self-lock after high-pressure torsion? |
 (Eng)
|
Plotnikov A.V., Greenberg B.A., Ivanov M.A., Pilyugin V.P., Tolmachev T.P., Antonova O.V., Patselov A.M.
|
Vol 118, No 8 (2017) |
Autowave processes of the localization of plastic flow in active media subjected to deformation |
 (Eng)
|
Zuev L.B.
|
Vol 118, No 8 (2017) |
Structure formation and properties of a copper–aluminum joint produced by ultrasound-assisted explosive welding |
 (Eng)
|
Kuz’min E.V., Peev A.P., Kuz’min S.V., Lysak V.I.
|
Vol 118, No 7 (2017) |
Elastic properties, internal stresses, and excess volume of nanomaterials |
 (Eng)
|
Vasil’ev L.S., Lomaev S.L.
|
Vol 118, No 7 (2017) |
Influence of structure on static cracking resistance and fracture of welded joints of pipe steels of strength class K60 |
 (Eng)
|
Tereshchenko N.A., Tabatchikova T.I., Yakovleva I.L., Makovetskii A.N., Shander S.V.
|
Vol 118, No 7 (2017) |
Comparison of appearance, microstructure and tensile properties during friction stir welding processes of Al–Si alloys |
 (Eng)
|
Shailesh Rao A., Yuvaraja N.
|
Vol 118, No 6 (2017) |
Effect of stresses on the structural changes in high-chromium steel upon creep |
 (Eng)
|
Fedoseeva A.E., Dudova N.R., Kaibyshev R.O.
|
Vol 118, No 6 (2017) |
Strength properties and structure of a submicrocrystalline Al–Mg–Mn alloy under shock compression |
 (Eng)
|
Petrova A.N., Brodova I.G., Razorenov S.V.
|
Vol 118, No 6 (2017) |
Effect of the origin of the modified surface layer on the structural strength of workpieces |
 (Eng)
|
D’yachenko S.S., Ponomarenko I.V.
|
Vol 118, No 5 (2017) |
Role of the structural state of a copper–beryllium alloy in the formation of its tribotechnical properties |
 (Eng)
|
Kukareko V.A.
|
Vol 118, No 5 (2017) |
Effect of impurities of Fe and Si on the structure and strengthening upon annealing of the Al–0.2% Zr–0.1% Sc alloys with and without Y additive |
 (Eng)
|
Pozdniakov A.V., Aitmagambetov A.R., Makhov S.V., Napalkov V.I.
|
Vol 118, No 5 (2017) |
Influence of the parameters of a high-frequency acoustic wave on the structure, properties, and plastic flow of metal in the zone of a joint of materials welded by ultrasound-assisted explosive welding |
 (Eng)
|
Peev A.P., Kuz’min S.V., Lysak V.I., Kuz’min E.V., Dorodnikov A.N.
|
Vol 118, No 5 (2017) |
Structure and creep of Russian reactor steels with a BCC structure |
 (Eng)
|
Sagaradze V.V., Kochetkova T.N., Kataeva N.V., Kozlov K.A., Zavalishin V.A., Vil’danova N.F., Ageev V.S., Leont’eva-Smirnova M.V., Nikitina A.A.
|
Vol 118, No 5 (2017) |
Interactions between radiation defects and interstitial impurities in nickel microalloyed with carbon and Boron under electron and neutron irradiation |
 (Eng)
|
Arbuzov V.L., Goshchitskii B.N., Danilov S.E., Kozlov A.V., Parkhomenko V.D., Pecherkina N.L., Sagaradze V.V.
|
Vol 118, No 4 (2017) |
Microstructural, mechanical, and electrical characterization of directionally solidified Al–Cu–Mg eutectic alloy |
 (Eng)
|
Kaygısız Y., Maraşlı N.
|
Vol 118, No 4 (2017) |
Structure, mechanical, and tribotechnical properties of an austenitic nitrogen steel after frictional treatment |
 (Eng)
|
Narkevich N.A., Shulepov I.A., Mironov Y.P.
|
Vol 118, No 4 (2017) |
Strength and substructure of Al–4.7Mg–0.32Mn–0.21Sc–0.09Zr alloy sheets |
 (Eng)
|
Zolotorevskiy V.S., Dobrozhinskaya R.I., Cheverikin V.V., Khamnagdaeva E.A., Pozdniakov A.V., Levchenko V.S., Besogonova E.S.
|
Vol 118, No 3 (2017) |
Study of the structural stability of the Nb–Cr alloy upon cyclic microdeformation |
 (Eng)
|
Lubimova L.L., Tashlykov A.A., Makeev A.A., Zavorin A.S.
|
Vol 118, No 3 (2017) |
Influence of deformation on the retention of helium in materials |
 (Eng)
|
Zaluzhnyi A.G.
|
Vol 118, No 3 (2017) |
Effect of heat-treatment conditions on the structure and phase transformations in the shape-memory 45Ti–45Ni–10Nb alloy in as-cast and extruded states |
 (Eng)
|
Popov N.N., Sysoeva T.I., Grishin E.N.
|
Vol 118, No 2 (2017) |
Effect of roll-bonding temperature on the strength and electrical conductivity of an α-brass-clad Cu–1Cr alloy composite |
 (Eng)
|
Kang G.T., Song J.S., Hong S.I.
|
101 - 125 of 179 Items |
<< < 1 2 3 4 5 6 7 8 > >>
|