Effect of Equal Channel Angular Pressing and Subsequent Annealing on Magnetic Properties of a Soft Magnetic Fe–Co Alloy
- Authors: Korshunov A.I.1, Osipova N.I.1, Olenin A.M.1, Pigarev Y.N.1, Kulakova O.V.1
-
Affiliations:
- Russian Federal Nuclear Center
- Issue: Vol 119, No 5 (2018)
- Pages: 448-451
- Section: Electrical and Magnetic Properties
- URL: https://journals.rcsi.science/0031-918X/article/view/167561
- DOI: https://doi.org/10.1134/S0031918X1805006X
- ID: 167561
Cite item
Abstract
The effect of severe plastic deformation on the microstructure and magnetic properties of a soft magnetic precision alloy 27KKh has been studied. Severe plastic deformation by equal-channel angular pressing has been used. It has been shown that equal-channel angular pressing that forms a fine-grain structure of the material leads to its magnetic hardening. The annealing of strongly deformed samples made it possible to significantly improve the magnetic characteristics. The magnetic permeability was increased by more than three times compared to the treatment that is carried out according to GOST State Standard 10160–75.
About the authors
A. I. Korshunov
Russian Federal Nuclear Center
Email: assa@astra.vniief.ru
Russian Federation, Sarov, 607188
N. I. Osipova
Russian Federal Nuclear Center
Author for correspondence.
Email: assa@astra.vniief.ru
Russian Federation, Sarov, 607188
A. M. Olenin
Russian Federal Nuclear Center
Email: assa@astra.vniief.ru
Russian Federation, Sarov, 607188
Yu. N. Pigarev
Russian Federal Nuclear Center
Email: assa@astra.vniief.ru
Russian Federation, Sarov, 607188
O. V. Kulakova
Russian Federal Nuclear Center
Email: assa@astra.vniief.ru
Russian Federation, Sarov, 607188
Supplementary files
