Email this article Pinhole Model Measurement Errors Compensation in 3D Scanners
- Authors: Benuni A.A.1, Kolyuchkin V.Y.2
-
Affiliations:
- Bauman Moscow State Technical University
- Department of Laser and Optoelectronic Systems, Bauman Moscow State Technical University
- Issue: Vol 127, No 4 (2019)
- Pages: 684-690
- Section: Applied Optics
- URL: https://journals.rcsi.science/0030-400X/article/view/166122
- DOI: https://doi.org/10.1134/S0030400X19100072
- ID: 166122
Cite item
Open Access
Access granted
Subscription Access
Abstract
Pinhole model measurement errors in 3D triangulation based scanners is studied in the present work. Pupil aberrations of the scanner lenses are shown to cause noticeable errors in determining the coordinates of surface points. The requirements for aberration characteristics are formulated to minimize the error of 3D scanners. A modification of the pinhole model allowing a decrease in the error induced by pupil aberration of lenses of triangulation-based scanners is proposed as well.
About the authors
A. A. Benuni
Bauman Moscow State Technical University
Author for correspondence.
Email: benuni_anna@mail.ru
Russian Federation, Moscow, 105005
V. Ya. Kolyuchkin
Department of Laser and Optoelectronic Systems, Bauman Moscow State Technical University
Email: benuni_anna@mail.ru
Russian Federation, Moscow, 105005
Supplementary files
