Enviar artigo por via de e-mail Roll Briquetting for Recycling of Aluminum Wire
- Autores: Babailov N.A.1, Loginov Y.N.2, Polyanskii L.I.3, Pervukhina D.N.2
-
Afiliações:
- Institute of Engineering Science, Ural Branch of the Russian Academy of Sciences
- Ural Federal University
- ZAO Spidermash
- Edição: Volume 62, Nº 7-8 (2018)
- Páginas: 717-722
- Seção: Article
- URL: https://journals.rcsi.science/0026-0894/article/view/242126
- DOI: https://doi.org/10.1007/s11015-018-0713-z
- ID: 242126
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
The properties of briquettes of chopped aluminum wire after roller briquetting are determined. Increasing the relative cell depth by 50% reduces the compression ratio by 11% and the drop strength by 13%. The dependence of the compression ratio and the distribution of density and drop strength on the relative depth of the cell in the roll of the briquetting press is established for different cell configurations.
Palavras-chave
Sobre autores
N. Babailov
Institute of Engineering Science, Ural Branch of the Russian Academy of Sciences
Autor responsável pela correspondência
Email: n.a.babailov@urfu.ru
Rússia, Ekaterinburg
Yu. Loginov
Ural Federal University
Email: n.a.babailov@urfu.ru
Rússia, Ekaterinburg
L. Polyanskii
ZAO Spidermash
Email: n.a.babailov@urfu.ru
Rússia, Ekaterinburg
D. Pervukhina
Ural Federal University
Email: n.a.babailov@urfu.ru
Rússia, Ekaterinburg
Arquivos suplementares
