Effect of Hot Rolling Parameters on Excess Phase Precipitation in Two-Phase Ferritic-Martensitic Steels


Citar

Texto integral

Acesso aberto Acesso aberto
Acesso é fechado Acesso está concedido
Acesso é fechado Somente assinantes

Resumo

Results are given for studying the effect of hot rolling parameters on morphological features of the structure and precipitation in hot rolled products destined for further cold rolling and heat treatment in a continuous annealing line. Temperatures for the end of rolling and coiling are varied with hot rolling of a laboratory melt. Depending on the combination of temperatures for the end of rolling and coiling temperature, the amount of precipitates and their preferred location vary.

Sobre autores

A. Nishchik

Bardin Central Research Institute of Ferrous Metallurgy (TsNIIchermet)

Autor responsável pela correspondência
Email: nischik-alexandr@yandex.ru
Rússia, Moscow

I. Rodionova

Bardin Central Research Institute of Ferrous Metallurgy (TsNIIchermet)

Email: nischik-alexandr@yandex.ru
Rússia, Moscow

O. Baklanova

Bardin Central Research Institute of Ferrous Metallurgy (TsNIIchermet)

Email: nischik-alexandr@yandex.ru
Rússia, Moscow

A. Grishin

Bardin Central Research Institute of Ferrous Metallurgy (TsNIIchermet)

Email: nischik-alexandr@yandex.ru
Rússia, Moscow

D. D’yakonov

Bardin Central Research Institute of Ferrous Metallurgy (TsNIIchermet)

Email: nischik-alexandr@yandex.ru
Rússia, Moscow

Arquivos suplementares

Arquivos suplementares
Ação
1. JATS XML

Declaração de direitos autorais © Springer Science+Business Media New York, 2016