电邮这篇文章 Effect of Quenching Medium on Mechanical Properties of Alloy Al7049-T6 and Lowering of its After-Machining Warpage
- 作者: Sani S.A.1, Feizabadi J.2, Pourgharibshahi M.1, Hashemi S.H.3
-
隶属关系:
- School of Metallurgy and Materials Engineering, University of Science and Technology
- Department of Metallurgical Engineering, Faculty of Engineering, Ferdowsi University of Mashhad
- Department of Materials Science and Engineering, University of Science and Technology
- 期: 卷 59, 编号 3-4 (2017)
- 页面: 145-149
- 栏目: Article
- URL: https://journals.rcsi.science/0026-0673/article/view/235595
- DOI: https://doi.org/10.1007/s11041-017-0118-9
- ID: 235595
如何引用文章
开放存取
##reader.subscriptionAccessGranted##
订阅存取
详细
Aluminum alloy Al 7049 is studied in state T6. Heat treatment of the specimens is performed in different quenching media (cold water, boiling water, aqueous polymer solutions). The mechanical properties and the Brinell hardness of the alloy are determined after different modes of heat treatment. Comparative analysis is used to find the maximum residual stresses responsible for warpage of the alloy after machining. The relation between the warpage and the dimensionless Biot number is obtained. Quenching modes removing the warpage in billets of Al7049 are determined.
作者简介
Saeed Sani
School of Metallurgy and Materials Engineering, University of Science and Technology
Email: petroprom2013@yandex.ru
伊朗伊斯兰共和国, Tehran
Javad Feizabadi
Department of Metallurgical Engineering, Faculty of Engineering, Ferdowsi University of Mashhad
Email: petroprom2013@yandex.ru
伊朗伊斯兰共和国, Mashhad
Mohammad Pourgharibshahi
School of Metallurgy and Materials Engineering, University of Science and Technology
Email: petroprom2013@yandex.ru
伊朗伊斯兰共和国, Tehran
Seyed Hashemi
Department of Materials Science and Engineering, University of Science and Technology
Email: petroprom2013@yandex.ru
伊朗伊斯兰共和国, Tehran
补充文件
