Effect of Annealing on the Electrical Resistivity and Strengthening of Low-Alloy Alloys of the Al – Zr – Si System
- Авторы: Alabin A.N.1, Belov N.A.1, Korotkova N.O.1, Samoshinal M.E.1
-
Учреждения:
- National University of Science and Technology “MISiS”
- Выпуск: Том 58, № 9-10 (2017)
- Страницы: 527-531
- Раздел: Aluminum Alloys
- URL: https://journals.rcsi.science/0026-0673/article/view/235919
- DOI: https://doi.org/10.1007/s11041-017-0048-6
- ID: 235919
Цитировать
Аннотация
The effect of annealing at up to 550°C on the electrical resistivity ρ and HB hardness of low-alloy alloys of the Al – Zr – Si system containing up to 0.3% Zr and 0.3% Si is studied. The Thermo-Calc software is used to analyze the phase composition of the system. The computed and experimental data are used to determine the lower and upper limits for heating of cast preforms from Al – Zr alloys (shaped castings and ingots). It is shown that heating below 400°C and above 450°C is not expedient, because it increases the duration of the annealing in the former case and lowers the hardening effect due to coarsening of the Zr-containing particles in the latter case.
Об авторах
A. Alabin
National University of Science and Technology “MISiS”
Email: nikolay-belov@yandex.ru
Россия, Moscow
N. Belov
National University of Science and Technology “MISiS”
Автор, ответственный за переписку.
Email: nikolay-belov@yandex.ru
Россия, Moscow
N. Korotkova
National University of Science and Technology “MISiS”
Email: nikolay-belov@yandex.ru
Россия, Moscow
M. Samoshinal
National University of Science and Technology “MISiS”
Email: nikolay-belov@yandex.ru
Россия, Moscow
Дополнительные файлы
