Effect of Post Weld Heat Treatment on Strength and Microstructure of Friction Stir Welded Lap Joints of AA2014-T6 Aluminum Alloy

C. Rajendran; K. Srinivasan; V. Balasubramanian; H. Balaji; P. Selvaraj

doi:10.1007/s11041-019-00421-2

Effect of Post Weld Heat Treatment on Strength and Microstructure of Friction Stir Welded Lap Joints of AA2014-T6 Aluminum Alloy

Autores: Rajendran C.¹, Srinivasan K.², Balasubramanian V.², Balaji H.³, Selvaraj P.³
Afiliações:
1. Sri Krishna College of Engineering and Technology
2. Annamalai University
3. Aeronautical Development Agency
Edição: Volume 61, Nº 5-6 (2019)
Páginas: 305-310
Seção: Article
URL: https://journals.rcsi.science/0026-0673/article/view/236632
DOI: https://doi.org/10.1007/s11041-019-00421-2
ID: 236632

Citar

Texto integral

Acesso aberto
Acesso é fechado

Acesso está concedido
Acesso é fechado

Somente assinantes

Resumo
Sobre autores
Bibliografia
Arquivos suplementares
Estatísticas

Resumo

Lap joints of AA2014 aluminum alloy produced by friction stir welding and subjected to post weld heat treatment have been studied. The shear strength and hardness of the welded joints were determined. The structure of the weld and weld-affected zone was studied. A fractographic analysis of the fracture surface of the tested samples was performed. The post weld heat treatment modes were established to enable recovery of the mechanical properties of the welded joints.