The Influence of High-Pressure Gas Nitriding on the Properties of Martensitic Steels
- Авторлар: Alekseeva M.S.1,2, Gress M.A.3, Scherbakov S.P.3, Gerasimov S.A.3, Kuksenova L.I.3,2
-
Мекемелер:
- All-Russia Institute of Aviation Materials (VIAM)
- Mechanical Engineering Research Institute, Russian Academy of Sciences
- N. É. Bauman Moscow State Technical University
- Шығарылым: Том 59, № 7-8 (2017)
- Беттер: 524-528
- Бөлім: Thermochemical Treatment
- URL: https://journals.rcsi.science/0026-0673/article/view/235890
- DOI: https://doi.org/10.1007/s11041-017-0183-0
- ID: 235890
Дәйексөз келтіру
Аннотация
The influence of high-pressure gas nitriding on the structure and properties of martensitic steels VKS-5, VKS-7, 20Kh3N3MFB, and 25Kh5M is investigated. It is shown that the high-pressure nitriding increases the thickness of the diffusion zone at substantial reduction of the process time as compared to the traditional gas-phase nitriding. Increase of the post-treatment cooling rate above 30 K/min favors the formation of diffusion layers with greater hardness.
Авторлар туралы
M. Alekseeva
All-Russia Institute of Aviation Materials (VIAM); Mechanical Engineering Research Institute, Russian Academy of Sciences
Хат алмасуға жауапты Автор.
Email: alekseeva_ms@list.ru
Ресей, Moscow; Moscow
M. Gress
N. É. Bauman Moscow State Technical University
Email: alekseeva_ms@list.ru
Ресей, Moscow
S. Scherbakov
N. É. Bauman Moscow State Technical University
Email: alekseeva_ms@list.ru
Ресей, Moscow
S. Gerasimov
N. É. Bauman Moscow State Technical University
Email: alekseeva_ms@list.ru
Ресей, Moscow
L. Kuksenova
N. É. Bauman Moscow State Technical University; Mechanical Engineering Research Institute, Russian Academy of Sciences
Email: alekseeva_ms@list.ru
Ресей, Moscow; Moscow
Қосымша файлдар
