Мақаланы E-mail арқылы жіберу Effect of Heat Treatment on the Hardness and Wear of Grinding Balls
- Авторлар: Aissat S.1, Sadeddine A.2, Bradai M.A.2, Younes R.2, Bilek A.3, Benabbas A.4
-
Мекемелер:
- Research Laboratory of Industrial Technologies. Department of Mechanical Engineering, Faculty of Applied Sciences Ibn Khaldoun University
- Laboratory of Mechanics, Materials and Energetic (L2ME), Faculty of Technology, University of Bejaia
- Faculty of Construction Engineering, Mechanical Engineering Department, UMMTO University of Tizi-Ouzou
- Laboratory of Processes for Materials, Energy, Water and Environment (LPM3E). Faculty of Science and Technology, University of Bouira
- Шығарылым: Том 59, № 5-6 (2017)
- Беттер: 297-301
- Бөлім: Article
- URL: https://journals.rcsi.science/0026-0673/article/view/235718
- DOI: https://doi.org/10.1007/s11041-017-0146-5
- ID: 235718
Дәйексөз келтіру
Ашық рұқсат
Рұқсат берілді
Тек жазылушылар үшін
Аннотация
The effect quenching and tempering by different regimes on Rockwell hardness and wear processes of grinding balls 50 and 70 mm in diameter made of two melts of chromium-molybdenum cast iron is studied. The heating temperature for quenching is 850, 950, and 1050°C; the tempering temperature is 250, 400, and 600°C. Iron is analyzed in an electron microscope. Diffraction patterns are obtained. A model of cast iron wear is suggested and compared to the Davis model and to experimental results. An optimum heat treatment regime is proposed.
Авторлар туралы
Sahraoui Aissat
Research Laboratory of Industrial Technologies. Department of Mechanical Engineering, Faculty of Applied Sciences Ibn Khaldoun University
Хат алмасуға жауапты Автор.
Email: sh_aissat@yahoo.fr
Алжир, Tiaret
Abdelhamid Sadeddine
Laboratory of Mechanics, Materials and Energetic (L2ME), Faculty of Technology, University of Bejaia
Email: sh_aissat@yahoo.fr
Алжир, Bejaia
Mohand Bradai
Laboratory of Mechanics, Materials and Energetic (L2ME), Faculty of Technology, University of Bejaia
Email: sh_aissat@yahoo.fr
Алжир, Bejaia
Rassim Younes
Laboratory of Mechanics, Materials and Energetic (L2ME), Faculty of Technology, University of Bejaia
Email: sh_aissat@yahoo.fr
Алжир, Bejaia
Ali Bilek
Faculty of Construction Engineering, Mechanical Engineering Department, UMMTO University of Tizi-Ouzou
Email: sh_aissat@yahoo.fr
Алжир, Tizi-Ouzou
Abderrahim Benabbas
Laboratory of Processes for Materials, Energy, Water and Environment (LPM3E). Faculty of Science and Technology, University of Bouira
Email: sh_aissat@yahoo.fr
Алжир, Bouira
Қосымша файлдар
