| 期 |
标题 |
文件 |
| 卷 61, 编号 1-2 (2019) |
A Study of Crystallographic Texture in a Refractory Nickel Alloy After Selective Laser Melting and Heat Treatment |
(Eng)
|
|
Treninkov I., Filonova E., Medvedev P., Lukina E.
|
| 卷 61, 编号 1-2 (2019) |
Deep Alloying of Steels with Refractory Additions with the Use of Pulsed Laser Radiation |
(Eng)
|
|
Gusev A., Guseva G.
|
| 卷 61, 编号 1-2 (2019) |
Influence of Quenching and Partitioning Temperature on Mechanical Properties of Steel 37MnSi5 |
(Eng)
|
|
Ghazvinloo H., Honarbakhsh-Raouf A.
|
| 卷 61, 编号 1-2 (2019) |
Assessment of Residual Stresses in Specimens of Ferritic-Pearlitic Steel with Austenitic Cladding |
(Eng)
|
|
Khlybov A., Ryabov D.
|
| 卷 61, 编号 1-2 (2019) |
Effect of Microstructure and Heat Treatment on Resistance of Steels to Carbon Dioxide Corrosion |
(Eng)
|
|
Zyryanov A., Vyboishchik M., Ioffe A.
|
| 卷 61, 编号 1-2 (2019) |
Effect of the Rate of Multiaxial Compression at Room Temperature on the Evolution of Microstructure of Commercial-Purity Aluminum |
(Eng)
|
|
Yang Y., Yang S., Wang Z., Gao X.
|
| 卷 61, 编号 1-2 (2019) |
Highly Efficient and Environmental Process for Removing Alkali Metals from Aluminum Melt |
(Eng)
|
|
Wang H., Fu G., Cheng C., Wang L.
|
| 卷 61, 编号 1-2 (2019) |
A Study of the Effect of Modes of Isothermal Quenching on the Structure and Properties of Alloy V-1341T |
(Eng)
|
|
Puchkov Y., Polyanskii V., Sedova L.
|
| 卷 60, 编号 11-12 (2019) |
Microstructure and Mechanical Properties of Dissimilar Al – Cu Joints Formed by Friction Stir Welding |
(Eng)
|
|
Ryl’kov E., Isupov F., Naumov A., Panchenko O., Shamshurin A.
|
| 卷 60, 编号 11-12 (2019) |
A Study of Structural Features of a Gradient Material from a Heat-Resistant Nickel Alloy Produced by Laser Cladding |
(Eng)
|
|
Masaylo D., Popovich A., Sufiyarov V., Orlov A., Shamshurin A.
|
| 卷 60, 编号 11-12 (2019) |
Effect of Heat Treatment Modes on the Structure and Properties of Alloy VT6 After Selective Laser Melting |
(Eng)
|
|
Sufiyarov V., Borisov E.
|
| 卷 60, 编号 11-12 (2019) |
Macrostructure and Mechanical Properties of Al – Si, Al – Mg – Si, and Al – Mg – Mn Aluminum Alloys Produced by Electric Arc Additive Growth |
(Eng)
|
|
Panchenko O., Zhabrev L., Kurushkin D., Popovich A.
|
| 卷 60, 编号 11-12 (2019) |
Effect of Heat Treatment on the Structure and Phase Composition of a High-Temperature Nickel Alloy Obtained by Laser Cladding |
(Eng)
|
|
Masaylo D., Orlov A., Igoshin S.
|
| 卷 60, 编号 11-12 (2019) |
Effect of Medium-Temperature Additional Tempering on the Carbide Phase and Cold Resistance of Heat-Hardenable Steel 09G2SA-A |
(Eng)
|
|
Gorynin V., Kondrat’ev S., Olenin M., Mikhailov M.
|
| 卷 60, 编号 11-12 (2019) |
A Study of Modes of Hardening Heat Treatment of Titanium Alloy VT23 |
(Eng)
|
|
Kondrat’eva O., Kondrat’ev S., Shvetsov O.
|
| 卷 60, 编号 11-12 (2019) |
Morphology of High-Strength Heat-Resistant Steel Powder for Machines for Additive Production from Shavings |
(Eng)
|
|
Razumov N., Popovich A., Grigor’ev A., Silin A., Goncharov I.
|
| 卷 60, 编号 11-12 (2019) |
Tailoring the Properties in Functionally Graded Alloy Inconel 718 Using Additive Technologies |
(Eng)
|
|
Popovich V., Borisov E., Sufiyarov V., Popovich A.
|
| 卷 60, 编号 11-12 (2019) |
Effect of the Temperature of Friction Stir Welding on the Microstructure and Mechanical Properties of Welded Joints of an Al – Cu – Mg Alloy |
(Eng)
|
|
Naumov A., Isupov F., Golubev Y., Morozova Y.
|
| 卷 60, 编号 11-12 (2019) |
Metal Science and Heat Treatment Volume 60, Number 12 |
(Eng)
|
|
|
| 卷 60, 编号 11-12 (2019) |
Metal Science and Heat Treatment Volume 60, Number 11 |
(Eng)
|
|
|
| 卷 60, 编号 11-12 (2019) |
A Study of Graphitization of Free-Cutting Steel |
(Eng)
|
|
Zhang Y., Han J.
|
| 卷 60, 编号 11-12 (2019) |
Raising the Corrosion Resistance of Plasma-Nitrided Steel 45 (AISI 1045) by Preliminary Sandblasting |
(Eng)
|
|
Miao B., Zhao X., Song L., Wei K., Hu J.
|
| 卷 60, 编号 11-12 (2019) |
Nonmetallic Inclusions in Alloys of the Fe – Co – Ni – Cu – Al – Ti System with Hafnium and Niobium |
(Eng)
|
|
Belyaev I., Bazhenov V., Moiseev A.
|
| 卷 60, 编号 11-12 (2019) |
Determination of the Parameters of Precipitates in Aged Mg – 8% Zn – 4% Al – 0.2% Cr – 0.5% Bi Alloy |
(Eng)
|
|
Ye J., Lin X., Dong Y., Teng F., Sun G.
|
| 卷 60, 编号 11-12 (2019) |
Synthesis and Investigation of Quaternary Quasi-Crystalline Phase in Al – Cu – Fe – Cr Alloys |
(Eng)
|
|
Wang Y., Hou H., Zhao Y., Tian J.
|
| 51 - 75 的 350 信息 |
<< < 1 2 3 4 5 6 7 8 9 10 > >>
|
