Ferromanganese Crusts in the Central Basin, Sea of Japan

Аннотация

The paper presents a comparative analysis of ferromanganese crusts and concretions (FMC) recovered during the dredging of 14 seamounts in the Central Basin, Sea of Japan. The major rock-forming elements in FMC are Mn, Fe, and Si. In terms of the Mn content, the studied 53 samples are divided into four groups: (1) less than 10% (given than concentrations of 2–8% are lacking); (2) 10‒25%; (3) 25‒42%; and (4) 42‒63%. The (Mn + Fe)/Si ratio increases from group 1 to group 4, and average value in them is 1.6, 2.5, 6.7, and 70.7, respectively. Taking Fe/Si and Mn/Si values into consideration, concretions of these groups belong to the following varieties: (1) ferrosiliceous; (2) mangano-ferrosiliceous; (3) siliceous-ferromanganese, and (4) manganiferous. The highest concentration of nonferrous metals is observed in FMC of groups 2 and 3. Their concentration is slightly lower in group 4 and very low in group 1. The internal structure of FMC in these groups is variable, suggesting their different formation settings. Crusts of group 1 were formed during the precipitation of Mn from a hydrothermal plume on the older ferrosiliceous crusts. Crusts of groups 2 and 3 were likely formed by the diffuse percolation of Mn-bearing hydrothermal solutions along fractures and weakened zones in volcanic rocks, with their subsequent cementation by manganiferous hydroxides from sedimentary or volcaniclastic deposits on seamounts. Crusts of group 4 were formed at sites of the hydrothermal solution discharge on the seafloor. FMC of different groups are recovered during the dredging of most volcanic seamounts in the Central Basin (Sea of Japan). Since the dredging is accomplished at a depth interval of a few hundreds of meters, the detection of concretions of a certain type is governed by the distance to the nearest hydrothermal source.