Effect of Heat Treatment on Mechanical and Microstructural Properties of the Welded Joint of the Al–Mg–Li Alloy Obtained by Laser Welding
- Autores: Orishich A.1, Malikov A.1, Karpov E.1,2, Pavlov N.1, Mesenzova I.1
-
Afiliações:
- Khristianovich Institute of Theoretical and Applied Mechanics, Siberian Branch
- Lavrentyev Institute of Hydrodynamics, Siberian Branch
- Edição: Volume 59, Nº 3 (2018)
- Páginas: 561-568
- Seção: Article
- URL: https://journals.rcsi.science/0021-8944/article/view/161159
- DOI: https://doi.org/10.1134/S0021894418030215
- ID: 161159
Citar
Resumo
Laser welding of the 1420 alloy of the Al–Mg–Li system is experimentally studied for the purpose of its optimization. Various modes of heat treatment of fixed joints obtained by means of laser welding are considered. Heat treatment modes that allow significant enhancement of the welded joint density as compared to the as-received alloy are chosen. The ultimate relative elongation of samples after ageing is found to decrease by a factor of 3.
Palavras-chave
Sobre autores
A. Orishich
Khristianovich Institute of Theoretical and Applied Mechanics, Siberian Branch
Autor responsável pela correspondência
Email: laser@itam.nsc.ru
Rússia, Novosibirsk, 630090
A. Malikov
Khristianovich Institute of Theoretical and Applied Mechanics, Siberian Branch
Email: laser@itam.nsc.ru
Rússia, Novosibirsk, 630090
E. Karpov
Khristianovich Institute of Theoretical and Applied Mechanics, Siberian Branch; Lavrentyev Institute of Hydrodynamics, Siberian Branch
Email: laser@itam.nsc.ru
Rússia, Novosibirsk, 630090; Novosibirsk, 630090
N. Pavlov
Khristianovich Institute of Theoretical and Applied Mechanics, Siberian Branch
Email: laser@itam.nsc.ru
Rússia, Novosibirsk, 630090
I. Mesenzova
Khristianovich Institute of Theoretical and Applied Mechanics, Siberian Branch
Email: laser@itam.nsc.ru
Rússia, Novosibirsk, 630090