Frictionless contact of an elastic punch subject to the normal load and bending moment
- Autores: Jiang X.1,2, Shao G.2, Zhu L.2
-
Afiliações:
- Key Laboratory of Electronic Equipment Structural Design
- State Key Laboratory for Manufacturing Systems Engineering
- Edição: Volume 57, Nº 2 (2016)
- Páginas: 359-368
- Seção: Article
- URL: https://journals.rcsi.science/0021-8944/article/view/159257
- DOI: https://doi.org/10.1134/S0021894416020206
- ID: 159257
Citar
Resumo
A two-dimensional contact problem of a trapezium shaped punch pressed into a frictionless, elastically similar half-plane and subject sequentially to the normal load and bending moment is considered. The model of a tilted flat punch is used to evaluate the pressure distribution and the contact deformation within the contact zone. Comparisons of the results generated by the analytical technique to those computed by the finite element method demonstrate the high level of accuracy attained by both methods. The presented numerical results illustrate the effects of the normal load, bending moment, and internal angles of the punch geometry on the contact stresses.
Palavras-chave
Sobre autores
X. Jiang
Key Laboratory of Electronic Equipment Structural Design; State Key Laboratory for Manufacturing Systems Engineering
Autor responsável pela correspondência
Email: xjjiang@xidian.edu.cn
República Popular da China, Xi’an; Xi’an
G. Shao
State Key Laboratory for Manufacturing Systems Engineering
Email: xjjiang@xidian.edu.cn
República Popular da China, Xi’an
L. Zhu
State Key Laboratory for Manufacturing Systems Engineering
Email: xjjiang@xidian.edu.cn
República Popular da China, Xi’an