Enviar artigo por via de e-mail Explosion Chambers with Metal Shields
- Autores: Meshcheryakov Y.P.1, Shtertser A.A.1,2, Zlobin B.S.1
-
Afiliações:
- Design and Technology Branch of the Lavrent’ev Institute of Hydrodynamics, Siberian Branch
- Lavrent’ev Institute of Hydrodynamics, Siberian Branch
- Edição: Volume 60, Nº 4 (2019)
- Páginas: 777-783
- Seção: Article
- URL: https://journals.rcsi.science/0021-8944/article/view/161626
- DOI: https://doi.org/10.1134/S0021894419040230
- ID: 161626
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
Metal shields of various thickness made of various steels and used to protect the shells of explosion chambers from damage by debris and reduce the loads on the structural elements have been studied. Dependences of the equivalent stresses in the protective shields and shells of explosion chambers and the final size of the gap between the shields and the shell on wall thickness, steel grade, and initial gap size were obtained by numerical simulation. Examples of explosion chamber designs with protective shields are given.
Palavras-chave
Sobre autores
Yu. Meshcheryakov
Design and Technology Branch of the Lavrent’ev Institute of Hydrodynamics, Siberian Branch
Email: asterzer@mail.ru
Rússia, Novosibirsk, 630090
A. Shtertser
Design and Technology Branch of the Lavrent’ev Institute of Hydrodynamics, Siberian Branch; Lavrent’ev Institute of Hydrodynamics, Siberian Branch
Autor responsável pela correspondência
Email: asterzer@mail.ru
Rússia, Novosibirsk, 630090; Novosibirsk, 630090
B. Zlobin
Design and Technology Branch of the Lavrent’ev Institute of Hydrodynamics, Siberian Branch
Email: asterzer@mail.ru
Rússia, Novosibirsk, 630090
Arquivos suplementares
